Stanyl® TW241B3

15% Carbon Reinforced, 熱安定, すべり性

一般情報

Stanyl®は、自動車、電気・電子機器のギア、汎用エンジン用途に使用されている高性能ポリアミド46です。
Stanyl®は 、優れた耐熱性、靭性、耐摩耗・摺動性、高い流動性が要求されるような過酷な用途にも対応し、高い性能を発揮します。
Stanyl®は220 ℃の高温でも機械的特性を維持するため、PPA(PA6T、PA9T)及びPPSやLCPを上回るような極めて高い性能が要求される用途に理想的な樹脂材料です。
特徴
各種規制

流動特性

成形収縮率 (流れ方向)
0.3
%
成形収縮率 (垂直方向)
1.1
%

機械特性

引張弾性率
13000
MPa
引張破断強度
185
MPa
引張破断ひずみ
2
%
曲げ弾性率
10500
MPa
曲げ強度
260
MPa
シャルピー衝撃強さ (23℃)
45
kJ/m²
シャルピー衝撃強さ (-30℃)
40
kJ/m²
シャルピー衝撃強さ ノッチ付き (23℃)
5
kJ/m²
シャルピー衝撃強さ ノッチ付き (-30℃)
4.5
kJ/m²
アイゾット衝撃強さ ノッチ付き (23℃)
5
kJ/m²
アイゾット衝撃強さ ノッチ付き (-40℃)
4.5
kJ/m²

熱的特性

融点 (10℃/min)
295
°C
ガラス転移温度 (10℃・min)
75
°C
荷重たわみ温度 (1.8MPa)
290
°C
線膨張係数 (流れ方向)
0.25
E-4/°C
線膨張係数 (垂直方向)
0.5
E-4/°C

その他特性

吸水率(水中)
11.5
%
吸水率 水中23℃、24時間
3.2
%
吸水率 (23℃/50%R.H.)
3.15
%
密度
1220
kg/m³

用途

Oil Pump Gears (automotive)

産業
Automotive
  • <ul> <li>Stanyl® PA46 allows for light weight solutions versus metal and it enables compact designs and reduced noise (as much as 20% reduction versus other plastics)</li> <li>Stanyl® PA46 allows for reliable solutions due to its high abrasion resistance (PA46 yields reduced wear (backlash) after 500 hours, and Stanyl® TW241B3 showed 5 microns wear versus 20 microns for PA66) and it yields high safety factors under jamming condition</li> </ul>

Power Door Actuators

産業
Automotive
  • <ul> <li>Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH</li> <li>Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM</li> <li>Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA</li> </ul>

Power Lift Gate Actuators

産業
Automotive
  • <ul> <li>Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH</li> <li>Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM</li> <li>Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA</li> </ul>

Power Seats

産業
Automotive
  • <ul> <li>Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH</li> <li>Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM</li> <li>Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA</li> </ul>

Power Window Actuators

産業
Automotive
  • <ul> <li>Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH</li> <li>Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM</li> <li>Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA</li> </ul>

Windshield Wiper Actuators

産業
Automotive
  • <ul> <li>Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH</li> <li>Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM</li> <li>Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA</li> </ul>