Stanyl® TE300

Heat Stabilized

Back to results

General Information

Stanyl® is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl® is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.
Special features
  • Heat stabilized
General Document
Processing technology
Injection Molding
Have a question? Contact us

Rheological properties

Molding shrinkage [parallel]
2
%
Molding shrinkage [normal]
2
%
Spiral flow length 1.0 mm 800 bar
110
mm
Spiral flow length 1.0 mm 900 bar
120
mm
Spiral flow length 1.0 mm 1000 bar
130
mm
Spiral flow length 0.5mm 1200 bar
60
mm
Spiral flow length 0.5 mm 1600 bar
70
mm
Spiral flow length 0.5mm 2000 bar
90
mm

Mechanical properties

Tensile modulus
3300
MPa
Tensile modulus (120°C)
800
MPa
Tensile modulus (160°C)
650
MPa
Tensile modulus (180°C)
600
MPa
Tensile modulus (200°C)
500
MPa
Tensile modulus, low thickness
3000
MPa
Tens. Mod. (Thickness tested)
1
mm
Yield stress
100
MPa
Yield stress (120°C)
50
MPa
Yield stress (160°C)
40
MPa
Yield stress (180°C)
35
MPa
Yield stress (200°C)
30
MPa
Yield strain
10
%
Nominal strain at break
40
%
Nominal strain at break (120°C)
>50
%
Nominal strain at break (160°C)
>50
%
Nominal strain at break (180°C)
>50
%
Nominal strain at break (200°C)
>50
%
Strain at break, at low thickness
35
%
Strain at break (Thickness tested)
1
mm
Flexural modulus
3000
MPa
Flexural modulus (120°C)
800
MPa
Flexural modulus (160°C)
600
MPa
Flexural strength
150
MPa
Flexural strength (120°C)
50
MPa
Flexural strength (160°C)
40
MPa
Charpy impact strength (+23°C)
N
kJ/m²
Charpy impact strength (-30°C)
N
kJ/m²
Charpy notched impact strength (+23°C)
10
kJ/m²
Charpy notched impact strength (-30°C)
4
kJ/m²
Izod notched impact strength (+23°C)
10
kJ/m²
Izod notched impact strength (-40°C)
4
kJ/m²
Weldline strength at thickness 1
92
MPa
Weldline strain at thickness 1
20
%
Thickness tested (1)
1
mm

Thermal properties

Melting temperature (10°C/min)
295
°C
Glass transition temperature (10°C/min)
75
°C
Temp. of deflection under load (1.80 MPa)
190
°C
Temp. of deflection under load (0.45 MPa)
280
°C
Vicat softening temperature (50°C/h 50N)
290
°C
Coeff. of linear therm. expansion (parallel)
0.85
E-4/°C
Coeff. of linear therm. expansion (normal)
1.1
E-4/°C
Burning Behav. at 1.5 mm nom. thickn.
V-2
class
Thickness tested
1.5
mm
UL recognition
Yes
-
Burning Behav. at 3.0 mm nom. thickn.
V-2
class
Thickness tested
3
mm
UL recognition
Yes
-
Oxygen index
27
%
Glow Wire Flammability Index GWFI
960
°C
GWFI (Thickness (1) tested)
3
mm
Glow Wire Flammability Index GWFI
775
°C
GWFI (Thickness (2) tested)
0.75
mm
Glow Wire Ignition Temperature GWIT
700
°C
GWIT (Thickness (1) tested)
3
mm
Glow Wire Ignition Temperature GWIT
775
°C
GWIT (Thickness (2) tested)
0.75
mm
Relative Temperature Index - electrical
130
°C
RTI electrical (Thickness (1) tested)
0.9
mm
Relative Temperature Index - electrical
130
°C
RTI electrical (Thickness (2) tested)
3
mm
Thermal Index 2500 hrs
134
°C
Thermal Index 5000 hrs
128
°C
Thermal Index 10000 hrs
122
°C
Thermal Index 20000 hrs
116
°C

Electrical properties

Relative permittivity (100Hz)
4
-
Relative permittivity (1 MHz)
3.6
-
Dissipation factor (100 Hz)
70
E-4
Dissipation factor (1 MHz)
260
E-4
Volume resistivity
1E13
Ohm*m
Surface resistivity
Ohm
Electric strength
25
kV/mm
Comparative tracking index
600
V

Other properties

Water absorption
13.5
%
Water absorption in water at 23°C after 24h
3.8
%
Humidity absorption
3.7
%
Density
1180
kg/m³

Material specific properties

Viscosity number
175
cm³/g