Novamid® 1013CH5 2
Injection Molding, Easy Molding Grade, Heat Stabilized, Lubricated, Nucleated
General Information
Novamid® is a high-quality polyamide, that has been developed as a special product line in order to cope with high demand levels from our Japanese customers.
Novamid® has seen various applications in various fields and various regions. From car to packaging, Novamid® is supported by an experienced and wide range of experts.
Special features
- Heat stabilized
- Lubricated
- Nucleated
General Document
Regulatory Affairs
- Absence Declaration BNST2023-11-16
- Absence Declaration Biocidal Products2023-11-16
- Absence Declaration EPA 20 High Priority Substances 20192023-11-16
- Absence Declaration Food Allergens2023-11-16
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals2023-11-16
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration PFAS2024-03-05
- Absence Declaration POPs (Persistent Organic Pollutants)2023-10-27
- Absence Declaration Red Phosphorus2023-11-16
- Conflict minerals declaration (EICC, GeSI)2024-03-21
- Packaging, Packaging Waste and CONEG declaration (94/62/EC)2021-12-06
- REACH Registration Statement2024-03-27
- REACH STATEMENT KOREA2023-11-16
- REACH STATEMENT TURKYE2023-11-16
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2024-03-27
- Turkish customs legislation info letter (EK-8 form)2023-11-16
Yellow Card
Processing technology
Injection Molding
Injection Molding
Rheological properties
Melt volume-flow rate
30
cm³/10min
ISO 1133
Temperature
230
°C
ISO 1133
Load
2.16
kg
ISO 1133
Molding shrinkage [parallel]
1.2
%
Sim. to ISO 294-4
Molding shrinkage [normal]
1.3
%
Sim. to ISO 294-4
Mechanical properties
Tensile modulus
2800
MPa
ISO 527-1/-2
Yield stress
85
MPa
ISO 527-1/-2
Nominal strain at break
15
%
ISO 527-1/-2
Flexural modulus
2800
MPa
ISO 178
Flexural strength
110
MPa
ISO 178
Charpy impact strength (+23°C)
N
kJ/m²
ISO 179/1eU
Charpy notched impact strength (+23°C)
3
kJ/m²
ISO 179/1eA
Thermal properties
Melting temperature (10°C/min)
220
°C
ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa)
75
°C
ISO 75-1/-2
Temp. of deflection under load (0.45 MPa)
166
°C
ISO 75-1/-2
Electrical properties
Relative permittivity (1 MHz)
4
-
IEC 62631-2-1
Volume resistivity
>1E13
Ohm*m
IEC 62631-3-1
Surface resistivity
Ohm
IEC 62631-3-2
Electric strength
26
kV/mm
IEC 60243-1
Comparative tracking index
600
V
IEC 60112
Other properties
Humidity absorption
2.8
%
Sim. to ISO 62
Density
1130
kg/m³
ISO 1183
Material specific properties
Viscosity number
133
cm³/g
ISO 307, 1157, 1628
