Arnite® TV4 261 /G UN.02.09
30% Glass Reinforced, Glueable
General Information
Arnite® T (PBT) is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. It’s well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
Special features
- Glueable
General Document
Regulatory Affairs
- Absence Declaration BNST2023-11-16
- Absence Declaration Biocidal Products2023-11-16
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration EPA 20 High Priority Substances 20192023-11-16
- Absence Declaration Food Allergens2023-11-16
- Absence Declaration NMP (N-Methylpyrrolidone)2023-11-16
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals2024-04-25
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration PFAS2024-03-05
- Absence Declaration POPs (Persistent Organic Pollutants)2023-10-27
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- Absence Declaration opBDE (2003/11/EC: Octa- / Pentabromodiphenylether)2023-11-16
- CALIFORNIA PROPOSITION 65 (INDUSTRIAL USE)2024-01-02
- Conflict minerals declaration (EICC, GeSI)2024-03-21
- Packaging, Packaging Waste and CONEG declaration (94/62/EC)2021-12-06
- REACH Registration Statement2024-03-27
- REACH STATEMENT KOREA2023-11-16
- REACH STATEMENT TURKYE2023-11-16
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2024-03-27
- Turkish customs legislation info letter (EK-8 form)2023-11-16
Processing technology
Injection Molding
Injection Molding
Rheological properties
Melt volume-flow rate
18
cm³/10min
ISO 1133
Temperature
250
°C
ISO 1133
Load
2.16
kg
ISO 1133
Molding shrinkage [parallel]
0.33
%
Sim. to ISO 294-4
Molding shrinkage [normal]
1.2
%
Sim. to ISO 294-4
Mechanical properties
Tensile modulus
10000
MPa
ISO 527-1/-2
Tensile modulus (120°C)
3700
MPa
ISO 527-1/-2
Stress at break
135
MPa
ISO 527-1/-2
Strain at break
2.5
%
ISO 527-1/-2
Strain at break (120°C)
5
%
ISO 527-1/-2
Strain at break (160°C)
5.2
%
ISO 527-1/-2
Charpy impact strength (+23°C)
60
kJ/m²
ISO 179/1eU
Charpy impact strength (-30°C)
60
kJ/m²
ISO 179/1eU
Charpy notched impact strength (+23°C)
9
kJ/m²
ISO 179/1eA
Charpy notched impact strength (-30°C)
9
kJ/m²
ISO 179/1eA
Thermal properties
Melting temperature (10°C/min)
225
°C
ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa)
205
°C
ISO 75-1/-2
Temp. of deflection under load (0.45 MPa)
220
°C
ISO 75-1/-2
Coeff. of linear therm. expansion (parallel)
0.35
E-4/°C
ISO 11359-1/-2
Coeff. of linear therm. expansion (normal)
0.7
E-4/°C
ISO 11359-1/-2
Oxygen index
20
%
ISO 4589-1/-2
Electrical properties
Relative permittivity (100Hz)
3.9
-
IEC 62631-2-1
Relative permittivity (1 MHz)
3.7
-
IEC 62631-2-1
Dissipation factor (100 Hz)
25
E-4
IEC 62631-2-1
Dissipation factor (1 MHz)
170
E-4
IEC 62631-2-1
Volume resistivity
>1E13
Ohm*m
IEC 62631-3-1
Electric strength
30
kV/mm
IEC 60243-1
Comparative tracking index
400
V
IEC 60112
Comparative tracking index (PLC)
1
class
UL 746A
Other properties
Water absorption
0.3
%
Sim. to ISO 62
Humidity absorption
0.15
%
Sim. to ISO 62
Density
1520
kg/m³
ISO 1183
Rheological calculation properties
Density of melt
1220
kg/m³
-
Thermal conductivity of melt
0.185
W/(m K)
-
Spec. heat capacity melt
1850
J/(kg K)
-
Eff. thermal diffusivity
8.23E-8
m²/s
-
