Arnite® T06 202

Medium Viscosity, Injection Molding, Food Contact Quality

General Information

Arnite® (PBT, PET and blends) are high-performance engineering plastics that combine high strength and rigidity with excellent processing characteristics. As a result, Arnite® A (PET)  and Arnite® T (PBT) are well suited for a broad range of automotive, electrical & electronic and consumer goods applications.
A wide portfolio of Arnite® is available including unreinforced, reinforced and flame retardant grades.
Special features
Regulatory Affairs
Processing technology
Injection Molding
Automotive OEM
CALLOUT, GM, MERCEDES
OEM Specification
ASTM D5927 TPES 0115
DBL 5410.00 (2010-08)
GMW17539P-PBT

Rheological properties

Melt volume-flow rate
24
cm³/10min
Temperature
250
°C
Load
2.16
kg
Molding shrinkage [parallel]
2
%
Molding shrinkage [normal]
2
%

Mechanical properties

Tensile modulus
2600
MPa
Yield stress
55
MPa
Yield strain
3.5
%
Nominal strain at break
>50
%
Charpy impact strength (+23°C)
N
kJ/m²
Charpy impact strength (-30°C)
N
kJ/m²
Charpy notched impact strength (+23°C)
4.1
kJ/m²
Charpy notched impact strength (-30°C)
4
kJ/m²

Thermal properties

Melting temperature (10°C/min)
225
°C
Temp. of deflection under load (1.80 MPa)
55
°C
Temp. of deflection under load (0.45 MPa)
165
°C
Coeff. of linear therm. expansion (parallel)
0.9
E-4/°C
Coeff. of linear therm. expansion (normal)
0.9
E-4/°C
Burning Behav. at 1.5 mm nom. thickn.
HB
class
Thickness tested
1.5
mm
UL recognition
Yes
-
Burning Behav. at thickness h
HB
class
Thickness tested
0.75
mm
UL recognition
Yes
-
Glow Wire Flammability Index GWFI
850
°C
GWFI (Thickness (1) tested)
1.5
mm
Glow Wire Flammability Index GWFI
850
°C
GWFI (Thickness (2) tested)
3
mm
Glow Wire Ignition Temperature GWIT
900
°C
GWIT (Thickness (1) tested)
1.5
mm
Glow Wire Ignition Temperature GWIT
850
°C
GWIT (Thickness (2) tested)
3
mm
Relative Temperature Index - electrical
130
°C
RTI electrical (Thickness (1) tested)
0.75
mm
Relative Temperature Index - electrical
130
°C
RTI electrical (Thickness (2) tested)
3
mm
Relative Temperature Index - with impact
95
°C
RTI with impact (Thickness (1) tested)
0.75
mm
Relative Temperature Index - with impact
110
°C
RTI with impact (Thickness (2) tested)
3
mm
Relative Temperature Index - without impact
125
°C
RTI without impact (Thickness (1) tested)
0.75
mm
Relative Temperature Index - without impact
130
°C
RTI without impact (Thickness (2) tested)
3
mm

Electrical properties

Relative permittivity (100Hz)
3.5
-
Relative permittivity (1 MHz)
3.2
-
Dissipation factor (100 Hz)
20
E-4
Dissipation factor (1 MHz)
200
E-4
Volume resistivity
>1E13
Ohm*m
Electric strength
27
kV/mm
Comparative tracking index
600
V

Other properties

Water absorption
0.45
%
Humidity absorption
0.18
%
Density
1300
kg/m³

Rheological calculation properties

Density of melt
1040
kg/m³
Thermal conductivity of melt
0.109
W/(m K)
Spec. heat capacity melt
2260
J/(kg K)
Eff. thermal diffusivity
4.65E-8
m²/s

Diagrams

Applications

Automotive Connectors

Industry
Automotive
  • <ul> <li>Stanyl® PA46, ForTii® PA4T, EcoPaXX® PA410, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high mechanical property levels and good electrical insulation properties</li> <li>Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs</li> <li>ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C</li> </ul>

Automotive Connectors (3)

Industry
Automotive
  • <ul> <li>Stanyl® PA46, ForTii® PA4T, EcoPaXX® PA410, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high mechanical property levels and good electrical insulation properties</li> <li>Arnite® PBT allows for reliable effective solutions especially because of very good electrical properties at elevated temperatures</li> </ul>