Akulon® Ultraflow K-FHGM35
15% Glass Reinforced, 25% Mineral Reinforced, Heat Stabilized, High Flow
General Information
Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon® grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon® sets the market standards.
Special features
- Good or high flow
- Heat stabilized
General Document
Regulatory Affairs
- Absence Declaration BNST2023-11-16
- Absence Declaration Biocidal Products2023-11-16
- Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
- Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
- Absence Declaration EPA 20 High Priority Substances 20192023-11-16
- Absence Declaration Food Allergens2023-11-16
- Absence Declaration NMP (N-Methylpyrrolidone)2023-11-16
- Absence Declaration Nano Materials2023-11-16
- Absence Declaration Ozone Depleting Chemicals2023-11-16
- Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
- Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
- Absence Declaration PFAS2024-03-05
- Absence Declaration POPs (Persistent Organic Pollutants)2023-10-27
- Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
- Absence Declaration Red Phosphorus2023-11-16
- Absence Declaration opBDE (2003/11/EC: Octa- / Pentabromodiphenylether)2023-11-16
- Conflict minerals declaration (EICC, GeSI)2024-03-21
- Packaging, Packaging Waste and CONEG declaration (94/62/EC)2021-12-06
- REACH Registration Statement2024-03-27
- REACH STATEMENT KOREA2023-11-16
- REACH STATEMENT TURKYE2023-11-16
- RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
- SVHC, REACH Annex XIV and –XVII Statement2024-03-27
- Turkish customs legislation info letter (EK-8 form)2023-11-16
Processing technology
Injection Molding
Injection Molding
Design challenge
Downsizing & Miniaturization
Downsizing & Miniaturization
Automotive OEM
FIAT CHRYSLER
FIAT CHRYSLER
OEM Specification
FCA-MS50017(MS-DB-41)-CPN2755-(2017-02)
FCA-MS50017(MS-DB-41)-CPN2927-(2017-02)
FCA-MS50017(MS-DB-41)-CPN3441-(2017-02)
FCA-MS50017(MS-DB-41)-CPN4759-(2017-02)
FCA-MS50017(MS-DB-41)-CPN2755-(2017-02)
FCA-MS50017(MS-DB-41)-CPN2927-(2017-02)
FCA-MS50017(MS-DB-41)-CPN3441-(2017-02)
FCA-MS50017(MS-DB-41)-CPN4759-(2017-02)
Applications
Rheological properties
Molding shrinkage (parallel)
0.3
%
ISO 294-4
Molding shrinkage (normal)
0.9
%
ISO 294-4
Mechanical properties
Tensile modulus
9000
MPa
ISO 527-1/-2
Stress at break
120
MPa
ISO 527-1/-2
Strain at break
2.5
%
ISO 527-1/-2
Flexural modulus
7700
MPa
ISO 178
Flexural strength
165
MPa
ISO 178
Charpy impact strength (+23°C)
35
kJ/m²
ISO 179/1eU
Charpy impact strength (-30°C)
30
kJ/m²
ISO 179/1eU
Charpy notched impact strength (+23°C)
5
kJ/m²
ISO 179/1eA
Charpy notched impact strength (-30°C)
4
kJ/m²
ISO 179/1eA
Thermal properties
Melting temperature (10°C/min)
220
°C
ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa)
205
°C
ISO 75-1/-2
Temp. of deflection under load (0.45 MPa)
215
°C
ISO 75-1/-2
Coeff. of linear therm. expansion (parallel)
0.35
E-4/°C
ISO 11359-1/-2
Coeff. of linear therm. expansion (normal)
0.5
E-4/°C
ISO 11359-1/-2
Electrical properties
Relative permittivity (100Hz)
3.5
-
IEC 62631-2-1
Relative permittivity (1 MHz)
3.3
-
IEC 62631-2-1
Dissipation factor (100 Hz)
50
E-4
IEC 62631-2-1
Dissipation factor (1 MHz)
140
E-4
IEC 62631-2-1
Volume resistivity
1E12
Ohm*m
IEC 62631-3-1
Surface resistivity
Ohm
IEC 62631-3-2
Electric strength
35
kV/mm
IEC 60243-1
Other properties
Water absorption
5.5
%
Sim. to ISO 62
Humidity absorption
1.7
%
Sim. to ISO 62
Density
1500
kg/m³
ISO 1183
Rheological calculation properties
Density of melt
1290
kg/m³
-
Thermal conductivity of melt
0.38
W/(m K)
-
Spec. heat capacity melt
2140
J/(kg K)
-
Eff. thermal diffusivity
1.37E-7
m²/s
-
Diagrams
Applications
Roof Racks
Industry
Automotive
- •} Reliable
- •} High heat resistance
- •} Great surface appearance
- •} Lightweight
- •} Cost effective
- •} High flowability enables thin wall designs
