Akulon® S223-HG0

50% Glass Reinforced, Heat Stabilized

Back to results

General Information

Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon® grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon® sets the market standards.
Special features
  • Heat stabilized
General Document
Regulatory Affairs
  • Absence Declaration BNST2023-11-16
  • Absence Declaration Biocidal Products2023-11-16
  • Absence Declaration DMF (2009/251/EC: Dimethylfumarate)2023-11-16
  • Absence Declaration ELV (2000/53/EC: Heavy metals)2024-02-15
  • Absence Declaration EPA 20 High Priority Substances 20192023-11-16
  • Absence Declaration Food Allergens2023-11-16
  • Absence Declaration NMP (N-Methylpyrrolidone)2023-11-16
  • Absence Declaration Nano Materials2023-11-16
  • Absence Declaration Ozone Depleting Chemicals2024-04-25
  • Absence Declaration PAH (Polycyclic Aromatic Hydrocarbons)2023-11-16
  • Absence Declaration PBT chemicals under TSCA section 6(h)2023-11-16
  • Absence Declaration PFAS2024-03-05
  • Absence Declaration POPs (Persistent Organic Pollutants)2023-10-27
  • Absence Declaration Phthalates (2005/84/EC: DEHP, DBP, BBP,DINP,DIDP, DNOP)2023-11-16
  • Absence Declaration Red Phosphorus2023-11-16
  • Absence Declaration opBDE (2003/11/EC: Octa- / Pentabromodiphenylether)2023-11-16
  • Conflict minerals declaration (EICC, GeSI)2024-03-21
  • Packaging, Packaging Waste and CONEG declaration (94/62/EC)2021-12-06
  • REACH Registration Statement2024-03-27
  • REACH STATEMENT KOREA2023-11-16
  • REACH STATEMENT TURKYE2023-11-16
  • RoHS Statement (2011/65/EC: Heavy metals)2024-02-01
  • SVHC, REACH Annex XIV and –XVII Statement2024-03-27
  • Turkish customs legislation info letter (EK-8 form)2023-11-16
Processing technology
Injection Molding
Design challenge
Designing structural parts | CAE
Automotive OEM
BMW, JAGUAR LAND ROVER, PSA, RENAULT, VW
OEM Specification
FTM64-0066-(2015-10)
GS 93016 (2011-01)
PMR (2019-02)
STELLANTIS - 01994-16-00164-MAN-01994-15-00082-(2021-07)
TPJLR.52.154-(2009-01)
TPJLR.52.155-(2009-09)
VW50133-PA66-8-A(2015-08)
Applications
Have a question? Contact us

Rheological properties

Melt volume-flow rate
10
cm³/10min
Temperature
275
°C
Load
5
kg
Molding shrinkage (parallel)
0.4
%
Molding shrinkage (normal)
1.2
%

Mechanical properties

Tensile modulus
16000
MPa
Tensile modulus (-40°C)
16500
MPa
Tensile modulus (40°C)
15000
MPa
Tensile modulus (100°C)
8000
MPa
Tensile modulus (120°C)
7400
MPa
Tensile modulus (140°C)
6900
MPa
Tensile modulus (150°C)
6600
MPa
Tensile modulus (160°C)
6300
MPa
Tensile modulus (180°C)
5700
MPa
Tensile modulus (200°C)
5200
MPa
Tensile modulus (210°C)
4900
MPa
Stress at break
240
MPa
Stress at break (-40°C)
300
MPa
Stress at break (100°C)
135
MPa
Stress at break (120°C)
120
MPa
Stress at break (140°C)
110
MPa
Stress at break (150°C)
105
MPa
Stress at break (160°C)
100
MPa
Stress at break (180°C)
85
MPa
Stress at break (200°C)
75
MPa
Stress at break (210°C)
70
MPa
Strain at break
2.7
%
Strain at break (-40°C)
2.6
%
Strain at break (120°C)
5.1
%
Strain at break (140°C)
5.3
%
Strain at break (150°C)
5.4
%
Strain at break (160°C)
5.5
%
Strain at break (180°C)
5.7
%
Strain at break (200°C)
5.9
%
Strain at break (210°C)
6
%
Flexural modulus
15500
MPa
Flexural modulus (120°C)
8000
MPa
Flexural modulus (160°C)
7000
MPa
Flexural modulus (180°C)
6500
MPa
Flexural modulus (200°C)
6100
MPa
Flexural modulus (210°C)
5800
MPa
Flexural strength
350
MPa
Flexural strength (120°C)
175
MPa
Flexural strength (160°C)
140
MPa
Flexural strength (180°C)
128
MPa
Flexural strength (200°C)
115
MPa
Flexural strength (210°C)
110
MPa
Charpy impact strength (+23°C)
90
kJ/m²
Charpy impact strength (-30°C)
97
kJ/m²
Charpy notched impact strength (+23°C)
16
kJ/m²
Charpy notched impact strength (-30°C)
14
kJ/m²
Weldline strength at thickness 1
95
MPa
Weldline strain at thickness 1
0.9
%
Thickness tested (1)
4
mm

Thermal properties

Melting temperature (10°C/min)
260
°C
Temp. of deflection under load (1.80 MPa)
253
°C
Temp. of deflection under load (0.45 MPa)
260
°C
Coeff. of linear therm. expansion (parallel)
0.2
E-4/°C
Coeff. of linear therm. expansion (normal)
0.6
E-4/°C
Thermal Index 2500 hrs
183
°C
Thermal Index 5000 hrs
168
°C
Thermal Index 10000 hrs
154
°C
Thermal Index 20000 hrs
141
°C

Other properties

Water absorption
4.2
%
Humidity absorption
1.2
%
Density
1570
kg/m³

Diagrams

Applications

Front End Modules

Industry
Automotive
Material
Injection moulding grades can be combined with advanced thermoplastic composites solutions or with metal inserts.}
More information

Timing drive systems

Industry
Automotive
Material
For more than 20 years, Envalior has helped the world’s leading automakers improve the performance and efficiency of timing chain systems, wear guide faces, support arms, and related thermoplastic components through advanced material science. Envalior offers a full portfolio of durable thermoplastic materials formulated to reduce timing chain friction and improve efficiency. To protect the environment and aid regulatory compliance, Envalior offers letters of conformity for any grades with PTFE confirming they do not contain harmful PFAS or PFOA. In addition, Envalior offers superior PTFE-free solutions with best-in-class low-friction performance such as Stanyl® HGR3.}
More information