51 Ergebnisse

EcoPaXX® Q-HG6

Polymer
PA410-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert
Neu

Central Floor

Branche
Automotive
  • The UD tapes based ply-books were thermo-formed to the final shape. The composite part is 18% lighter than state-of-the-art, steel-based designs, while still fulfilling safety requirements.
  • The composite strength and dimensional stability are not affected by the E-coating process.

EcoPaXX® Q-HG10

Polymer
PA410-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert
Neu

Door panel

Branche
Automotive
  • The UD tape products were thermo-formed and glued, which is 60% lighter than state-of-the-art , steel-based designs, while still fulfilling safety requirements.

EcoPaXX® Q-HGM24

Polymer
PA410-(GF+MD)30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 10% Glasfasern verstärkt, mit 20% Mineral, wärmestabilisiert
Neu

Wheel

Branche
Automotive
  • The hybrid wheel-rim is 2 kg lighter and 30% more fatigue-resistant than a steel design, whilst inert to road salts and battery acids.

EcoPaXX® Q-DWX10

Polymer
PA410-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, Ausgezeichnete Oberfläche, Drinking Water Grade, zugelassen für Lebensmittelkontakt

Abrasive brush monofilament

Branche
Consumer goods
  • EcoPaXX® PA410 allows for reliable solutions due to higher temperature resistance and higher abrasion resistance leading to longer life times as compared to PA610
  • EcoPaXX® PA410 leads to sustainable solutions since it is partly bio-based

EcoPaXX® Q150-D

Polymer
PA410
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität

Automotive Connectors

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, EcoPaXX® PA410, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high mechanical property levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

EcoPaXX® Q210E-H

Polymer
PA410
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Hohe Viskosität, wärmestabilisiert

Charge Air Cooler Caps

Branche
Automotive
  • Stanyl® PA46 allows for light weight solutions (40-50% lighter) and more cost effective solutions than metal
  • Stanyl® PA46 allows for reliable solutions due to its better creep/fatigue resistance than PPS and PPA and in case of Stanyl® Diablo due to its excellent long term temperature resistance up to 230°C
  • Akulon® and EcoPaXX® allow for light weight solutions (40-50% lighter) and more cost effective solutions than metal at the cold side.
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

EcoPaXX® Q-DWX6

Polymer
PA410-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, Ausgezeichnete Oberfläche, Drinking Water Grade, zugelassen für Lebensmittelkontakt

Coolant Hose T-Connectors

Branche
Automotive
  • EcoPaXX® PA410 allows for reliable solutions due to its high resistance to coolants even at elevated temperatures and due to its good thermo-mechanical properties (EcoPaXX® withstands high internal pressures at temperatures of up to 135°C outperforming PA66)
  • EcoPaXX® PA410 allows for light weight solutions (30% weight reduction versus PA66)
  • EcoPaXX® PA410 allows for sustainable solutions due to its biobased character

EcoPaXX® Q-KS

Polymer
PA410 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Flammwidrig (halogen- u. phosphorfrei)

Crankshaft Covers

Branche
Automotive
  • ForTii® PA4T, Stanyl® PA46 and EcoPaXX® PA410 allow for light weight solutions (50% less weight compared to metal) and for cost effective solutions (up to 25% lower system/part costs compared to metal)
  • ForTii® PA4T, Stanyl® PA46 and EcoPaXX® PA410 allow for reliable solutions due to good compatibility with FKM/LSR rubbers and to good creep&fatigue resistance in case of Stanyl® and to good temperature resistance up to 150-200°C in case of ForTii® and EcoPaXX®
  • Xytron™PPS can provide lots of benefits on creep, fatigue&oil resistance, even at elevated temperature.

EcoPaXX® Q-KV

Polymer
PA410 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Flammwidrig (halogen- u. phosphorfrei)

Engine Covers (close to turbo charged components)

Branche
Automotive
  • EcoPaXX® PA410 allows for reliable solutions to its high temperature resistance (better than PA6), its great surface appearanceand low warpage level
  • EcoPaXX® PA410 allows for more sustainable solutions due to its excellent carbon footprint (70% biobased) as compared to PA6 and PA66

EcoPaXX® Q-E7300

Polymer
PA410-I
Verarbeitung
Extrusion, Injection Molding, Tube Extrusion
Besondere Merkmale
Rohrextrusion

Faucet mixing valve

Branche
Building & construction
  • EcoPaXX® PA410 allows for reliable solutions due to its superior toughness, its improved bonding strength, its high hydrolytic stability (NSF61 is hot water certified) and its excellent dimensional stability
  • EcoPaXX® PA410 leads to sustainable solutions since it is partly bio-based

EcoPaXX® PA410-HC10 UD

Polymer
PA410-CF50
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz

Fuel Line Connectors

Branche
Automotive
Material
  • EcoPaXX® PA410 allows for reliable solutions due to its highly resistance and impermeability to conventional gasoline fuel (E10) as well as to the more sustainable E85 fuel, due to its good mechanical properties (outperforms current materials used in low temperature impact tests carried out at -30°C) , its very good dimensional stability (proven by short term aging at 100°C)
  • EcoPaXX® PA410 allows for sustainable solutions since it is 70% derived from renewable resources

EcoPaXX® PA410-HC11 UD

Polymer
PA410-CF55
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz

Fuel System: Various Components

Branche
Automotive
  • EcoPaXX® PA410, Stanyl® PA46 and Akulon® PA6 allow for reliable solutions due to their high resistance and impermeability to conventional gasoline fuel (E10) as well as to the more sustainable E85 fuel and to their good mechanical properties at various temperatures

EcoPaXX® PA410-HC12 UD

Polymer
PA410-CF60
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz

Fuel Vapor Separators

Branche
Automotive
Material
  • EcoPaXX® PA410 allows for reliable solutions due to its highly resistance and impermeability to conventional gasoline fuel (E10) as well as to the more sustainable E85 fuel, due to its good mechanical properties (outperforms current materials used in low temperature impact tests carried out at -30°C) , its very good dimensional stability (proven by short term aging at 100°C)
  • EcoPaXX® PA410 allows for sustainable solutions since it is 70% derived from renewable resources

EcoPaXX® PA410-HG10 UD

Polymer
PA410-GF50
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz

Snowboard bindings

Branche
Consumer goods
Material
  • EcoPaXX® PA410 allows for reliable solutions due to its good mechanical properties, also at low temperatures
  • EcoPaXX® PA410 allows for more sustainable solutions, since it enables solutions which are 100% carbon neutral from cradle to cradle

EcoPaXX® PA410-HG12 UD

Polymer
PA410-GF60
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz

Mountaineering shoes

Branche
Consumer goods
Material
  • EcoPaXX® PA410 allows for reliable solutions due its excellent low temperature resistanceand excellent combination of flexibility and stiffness as required in a mountaneering shoe
  • EcoPaXX® PA410 allows for more sustainable solutions, since it enables solutions which are 100% carbon neutral from cradle to cradle
  • EcoPaXX® PA410 allows for cost effective solutions due to its good processability

EcoPaXX® Q-FP4

Polymer
PA410-I
Verarbeitung
Injection Molding
Besondere Merkmale
Schlagzäh-modifiziert, Improved flow

Positition Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

EcoPaXX® Q-HG7

Polymer
PA410-GF35
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert

Speed Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

EcoPaXX® Q-HG8

Polymer
PA410-GF40
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert

Temperature Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

EcoPaXX® Q-HXG10 (Q-X07970)

Polymer
PA410-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert

Wheel Speed Sensors

Branche
Automotive
  • EcoPaXX® PA410 allows for reliable solutions due its thermal resistance up to 250°C and better chemical resistance than PA66, its better dimensional stability than PA6 and PA66 due to less moisture uptake
  • EcoPaXX® PA410 allows for very sustainable solutions to its low carbon footprint (70% biobased)
  • Stanyl® PA46 and Akulon® PA66 allow for reliable solutions due to their high melting point of 295 and 260 °C resulting in no deformation at very high sensor tip temperatures

EcoPaXX® Q-HXG6

Polymer
PA410-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Window profiles

Branche
Building & construction
Material
  • EcoPaXX® PA410 allows for light weight solutions as compared to traditional aluminium window profiles
  • EcoPaXX® PA410 allows for reliable solutions due to its high melting point of 250°C, making the material suitable for powder coating process
  • EcoPaXX® PA410 leads to sustainable solutions since it is partly bio-based

EcoPaXX® Q-HXGM24

Polymer
PA410-(GF+MD)30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 10% Glasfasern verstärkt, mit 20% Mineral, wärmestabilisiert

EcoPaXX® Q-KG5

Polymer
PA410-GF25
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt

EcoPaXX® Q-KG6

Polymer
PA410-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, für Anwendungen im E&E Bereich

EcoPaXX® Q-KGS6

Polymer
PA410-GF30 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, flammwidrig (halogenfrei)

EcoPaXX® Q-KGS8 (Q-X07132)

Polymer
PA410-GF40 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, flammwidrig (halogenfrei)

EcoPaXX® Q-PG6

Polymer
PA410-I-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, schlagzäh-modifiziert

EcoPaXX® Q-PG8 (Q-X07209)

Polymer
PA410-I-GF40
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, schlagzäh-modifiziert

EcoPaXX® Q-Y

Polymer
PA410-I
Verarbeitung
Injection Molding
Besondere Merkmale
Schlagzäh-modifiziert

EcoPaXX® Q150E

Polymer
PA410
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Folienextrusion, niedrige bis mittlere Viskosität, Extrusion

EcoPaXX® Q170E

Polymer
PA410
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Folienextrusion, Monofilament Grade, mittlere Viskosität, Extrusion

EcoPaXX® Q170E-H

Polymer
PA410
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Mittlere Viskosität, Extrusion, wärmestabilisiert