91 Ergebnisse

ForTii® F11

Polymer
PPA-GF30 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, Electro-friendly, Frei von rotem Phosphor und Halogenen, UL Registrierung V-0 bei 0.2mm

Structural Parts with ForTii® Ace

Branche
Automotive
  • Up to 50% weight reduction in comparison with metal
  • Part integration and increased design freedom
  • Easy and robust processing
  • Potential applications: engine mount/bracket, transmission parts, structural oilpan, timing chain cover, actuator and EPS housing, etc.

ForTii® F11C

Polymer
PPA-GF30 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, flammwidrig, Frei von rotem Phosphor und Halogenen, verbesserte Farbstabilität

Antenna splitters

Branche
Electronics
Material
  • ForTii® XS81B allows for reliable solutions due to its excellent performance under high-temperature and chemical processing and due to its high strength and tenacity implying high resistance to constant pulling and falling of the phones
  • ForTii® XS81B allows for cost effective solutions due to its high flowability facilitating thus the insert moulding process

ForTii® T11

Polymer
PPA-GF30 FR(40)
Verarbeitung
Injection Molding
Automobil OEM
VW
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, Electro-friendly, Frei von rotem Phosphor und Halogenen, UL Registrierung V-0 bei 0.2mm

Audio Jack Connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to its outstanding mechanical strength outperforming competitive materials for jacks by up to four times, therefore enabling 20.000-plus insertion/extraction cycles
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions to due good processability and high flowability enabling thin walled designs

ForTii® F12

Polymer
PPA-GF40 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, PA4T, flammwidrig, Frei von rotem Phosphor und Halogenen

Automotive Connectors

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, EcoPaXX® PA410, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high mechanical property levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

ForTii® Eco E11

Polymer
PPA-GF30 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen, UL Registrierung V-0 bei 0.15mm

Automotive e-motor Bobbins

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance (UL1446 class H certified) and creep resistance at elevated temperatures, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a good flowability and processability enabling therefore thin wall designs
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

ForTii® Ace JTX8

Polymer
PPA-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, für Anwendungen im E&E Bereich, Electro-friendly, verbesserter Widerstand gegen Blasenbildung während des Reflow-Lötens

Automotive Reflow Connectors

Branche
Automotive
  • ForTii® PA4T allows for reliable solutions due to high temperature resistance (melting temp 325ºC enables high reflow temperatures), high mechanical performance also after reflow soldering, high dimensional stability, a low isotropic CTE leading to a high co-planarity and low warpage after soldering
  • ForTii® PA4T allows for cost effective solutions due to high mechanical performance leading to reduced reject rates during pin assembly and due to high flowability enabling thin wall designs

ForTii® JTX2

Polymer
PPA-GF30
Verarbeitung
Injection Molding
Automobil OEM
VW
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, Electro-friendly, für Anwendungen im E&E Bereich

Battery Connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high-heat resistance, a unique balance of high stiffness and good flowability and high strength and creep resistance levels leading to good pin retention
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions to due good processability and high flowability enabling thin walled designs

ForTii® LDS85B

Polymer
PPA-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, Laser-Direkt-Strukturierung (LDS)

Camera Holder

Branche
Electronics
Material
  • ForTii® PA4T allows for reliable solutions due to its excellent high heat resistance (to endure the PVD process, even under 180°C & 60min) and due to its high bonding force of 120N with metal (PBT only 80N)
  • ForTii® PA4T allows for appealing solutions due to its good cosmetic performance (no fibres floating on surface)
  • ForTii® PA4T allow for cost effective solutions due to its good processability and high flowability enabling thin walled designs

ForTii® NMX33

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T, Suitable for NMT, Suitable for PVD

Carburetor adapter heat shield insulation wall

Branche
Consumer goods
  • ForTii® Ace has stable high temperature mechanics
  • also offers low creep
  • high stiffness at elevated temperatures

ForTii® MX1

Polymer
PPA-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, wärmestabilisiert, for Automotive applications

Contactors

Branche
Electrical
  • Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance
  • Akulon® PA6 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses

ForTii® MX2

Polymer
PPA-GF40
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, PA4T, wärmestabilisiert, for Automotive applications

Crankshaft Balance Gears

Branche
Automotive
  • Stanyl® PA46 allows for 40% lightweight (additional CO₂ reduction through improved moments of inertia) and 35% more cost effective solutions versus metal and it provides a significant reduction in rattling noise of gears in comparison with metal gears
  • Stanyl® PA46 is more cost effective in comparison with PEEK

ForTii® MX3

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T, wärmestabilisiert, for Automotive applications

Brushholders (electro motors)

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance (UL1446 class H certified) and creep resistance at elevated temperatures, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a good flowability and processability enabling therefore thin wall designs
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

ForTii® MX3T

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T, wärmestabilisiert, for Structural Parts

Coil insulation

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance (UL1446 class H certified) and creep resistance at elevated temperatures, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a good flowability and processability enabling therefore thin wall designs
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

ForTii® Ace MX51

Polymer
PPA-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, wärmestabilisiert, for Automotive applications

Crankshaft Covers

Branche
Automotive
  • ForTii® PA4T, Stanyl® PA46 and EcoPaXX® PA410 allow for light weight solutions (50% less weight compared to metal) and for cost effective solutions (up to 25% lower system/part costs compared to metal)
  • ForTii® PA4T, Stanyl® PA46 and EcoPaXX® PA410 allow for reliable solutions due to good compatibility with FKM/LSR rubbers and to good creep&fatigue resistance in case of Stanyl® and to good temperature resistance up to 150-200°C in case of ForTii® and EcoPaXX®
  • Xytron™PPS can provide lots of benefits on creep, fatigue&oil resistance, even at elevated temperature.

ForTii® Ace MX52

Polymer
PPA-GF40
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, PA4T, wärmestabilisiert, for Automotive applications

Cylinder head covers

Branche
Automotive
  • Faster injection molding process
  • Holding step eliminated
  • Shorter cooling time
  • Lower weight
  • Lower warpage

ForTii® Ace MX53

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T, wärmestabilisiert, for Automotive applications

DDR DIMM Connectors

Branche
Electronics
  • ForTii® PA4T allows for reliable solutions due to its excellent stiffness and high deflection temperature under load (HDT) and its excellent low warpage behaviour after reflow soldering, outperforming Liquid Crystal Polymer (LCPs) and polyphthalamides (PPAs)
  • ForTii® enables DDR manufacturers to produce more cost effective applications with reduced weight and height, enabling easy rework at lower temperature loads, with fewer heat traps and better thermal airflow
  • ForTii® PA4T allows for sustainable solutions due to its good carbon footprint and due the use of halogen and red-phosphorous free flameretardants

ForTii® Ace MX53T

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Automobil OEM
RENAULT
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T, wärmestabilisiert, Ausgezeichnete Oberfläche, for Structural Parts

EGR sensor

Branche
Automotive
  • ForTii® PA4T and Stanyl® PA46 allow for reliable solutions due to their high melting point of 325 and 295 °C resulting in no deformation at very high sensor tip temperatures and to their resistance to erosion from contamination in the exhaust stream
  • ForTii® PA4T and Stanyl® PA4 allow for cost effective solutions versus PEEK, LCP or other PPA

ForTii® MX15HR

Polymer
PPA-GF35
Verarbeitung
Injection Molding
Automobil OEM
GM, RENAULT
Besondere Merkmale
Mit 35% Glasfasern verstärkt, PA4T, Enhanced Hydrolytic Stability, for Automotive applications

EPS gears

Branche
Automotive
  • Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH
  • Stanyl® PA46 allows for reliable solutions due to its superiority in fatigue performance as compared to PA66
  • Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA

ForTii® WX11-FC

Polymer
PPA-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, zugelassen für Lebensmittelkontakt, Drinking Water Grade

EPS Steering components: Gears, Flex couplers and Sensors

Branche
Automotive
  • Stanyl® PA46 allows for light weight solutions (17% less weight than a metal alternative) and for sustainable solutions (NVH significant lower compared to metal)
  • Stanyl PA46 allows for reliable solutions due to its low friction and high abrasion resistance performance

ForTii® Ace WX51-FC

Polymer
PPA-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, zugelassen für Lebensmittelkontakt, Drinking Water Grade

Fan & shrouds

Branche
Automotive
  • Faster injection molding process
  • Holding step eliminated
  • Shorter cooling time
  • Lower weight
  • Lower warpage

ForTii® CX33

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T, Chemical resistant to a wide range of chemicals, geringe Verzugsneigung

Faucet mixing valve

Branche
Building & construction
  • EcoPaXX® PA410 allows for reliable solutions due to its superior toughness, its improved bonding strength, its high hydrolytic stability (NSF61 is hot water certified) and its excellent dimensional stability
  • EcoPaXX® PA410 leads to sustainable solutions since it is partly bio-based

ForTii® Ace WX53-FC

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T, zugelassen für Lebensmittelkontakt, Drinking Water Grade

Endlaminates (electro motors)

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance (UL1446 class H certified) and creep resistance at elevated temperatures, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a good flowability and processability enabling therefore thin wall designs
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

ForTii® CX33F

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T, Chemical resistant to a wide range of chemicals, geringe Verzugsneigung, verbesserte tribologische Eigenschaften

FPC connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to high stiffness even at elevated lead-free reflow assembly temperatures with hot spots up to 300°C
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to very low warpage levels to minimizing rejects significantly therefore
  • ForTii® PA4T allow for even more sustainable solutions with reduced environmental impact due to its lower carbon footprint as compared to alternative materials

ForTii® F81

Polymer
PPA-GF15 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 15% Glasfasern verstärkt, PA4T, Improved flow, flammwidrig, Frei von rotem Phosphor und Halogenen

Free-form camera housing

Branche
Electronics
Material
  • ForTii® PA4T offers better mechanical properties and thermal properties compared to alternative materials
  • It has outstanding adhesion performance with silicone
  • Thanks to ForTii’s unique color stability, the material was able to withstand the high processing temperature and yet, maintain the desired white color after the overmolding process

ForTii® H11

Polymer
PPA-GF30 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, sehr gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen

Fuse holder

Branche
Electrical
  • ForTii® allows the Fuse holder to withstand high temperatures and the material has a high impact resistance
  • Productivity improvement
  • Laser printing
  • Snap fitting
  • DIN rail mounting

ForTii® K11

Polymer
PPA-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, für Anwendungen im E&E Bereich, gute Fließfähigkeit

HDMI Connectors

Branche
Electronics
  • ForTii® PA4T allows for reliable solutions due to its high melting temperature (ideal for reflow process), high mechanical performance (also after reflow soldering), a high dimensional stability (result from low, isotropic CLTE), a high co-planarity and low warpage after soldering, and good dielectrics due to low moisture uptake
  • ForTii® PA4T allow for cost effective solutions to due good processability and high flowability enabling thin walled designs
  • ForTii® PA4T allow for even more sustainable solutions with reduced environmental impact due to its lower carbon footprint as compared to alternative materials

ForTii® K12

Polymer
PPA-GF40
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, PA4T, für Anwendungen im E&E Bereich

Industrial Control Gear

Branche
Electrical
  • Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance
  • Akulon® PA6 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses

ForTii® LDS51B

Polymer
PPA-GF30 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, Frei von rotem Phosphor und Halogenen, UL Registrierung V-0 bei 0.4mm, Laser-Direkt-Strukturierung (LDS)

Instrument panels

Branche
Automotive
  • Faster injection molding process
  • Holding step eliminated
  • Shorter cooling time
  • Lower weight
  • Lower warpage

ForTii® SP1

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T

LED Array Holder

Branche
Consumer goods
Material
  • ForTii® PA4T allows for reliable solutions due to its good mechanical integrity, its high flowability required to secure stiffness and its flammability rating V0 at 0.2mm
  • ForTii® PA4T allows for appealing solutions due to its bright white colour and a good colour stability after reflow soldering
  • ForTii® PA4T allows for cost effective solutions due to its ease of processability and for sustainable solutions due to its good carbon footprint

ForTii® TX1

Polymer
PPA-GF30 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, PA4T, Electro-friendly, Frei von rotem Phosphor und Halogenen, UL Registrierung V-0 bei 0.35mm

Medium Voltage Circuit Breaker Isolators

Branche
Electrical
Material
  • ForTii® PA4T allows for more sustainable solutions in end-products due to lower CO₂ footprint as compared to solutions with epoxy Xlink agent
  • ForTii® PA4T allows for significant system cost reduction due to lower density up to 17% than conventional materials, part weight reduction up to 35%, cycle time down by factor 7

ForTii® WF11 (P788A)

Polymer
(PPA+PTFE)-GF35
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt, PA4T, wärmestabilisiert, verbesserte tribologische Eigenschaften

Medium Voltage Circuit Breakers

Branche
Electrical
  • ForTii® PA4T allows for more sustainable solutions in end-products due to lower CO₂ footprint as compared to solutions with epoxy Xlink agent
  • ForTii® PA4T allows for potential system cost reduction opportunities due to part integration possibilities , possible thinner wall design withlower profiles possibilities, reduced cycle times with lower production losses

ForTii® XS51

Polymer
PPA-GF FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T, flammwidrig, Frei von rotem Phosphor und Halogenen

MCCB Housings

Branche
Electrical
  • Akulon® PA6 and ForTii® PA4T enable increased design flexibility and integrated functionality, facilitating smart assembly solutions
  • Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good dielectric aging performance at 150°C and high CTI values at 600 Volts
  • Akulon® PA6 and ForTii® PA4T allow for potential system cost reductions up to 15% ( wall thicknesses reduced leading to a volume reduction of up to 25%) compared to conventional materials

ForTii® XS81B

Polymer
PPA-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, PA4T

Medium Voltage Circuit Breakers Embedded Pole

Branche
Electrical
  • ForTii® PA4T allows for reliable solutions due to high and constant dielectric strength, matching the thermal expansion of interrupter
  • ForTii® PA4T allows for more sustainable solutions in end-products due to lower CO₂ footprint as compared to solutions with epoxy Xlink agent
  • ForTii® PA4T allows for potential system cost reduction opportunities due to part integration possibilities , possible thinner wall design withlower profiles possibilities, reduced cycle times with lower production losses (proven improved productivity with 7 times, increased recyclable rate from 0 up to 100%, reduce energy consumption 87.3%)

Micro appliance connector

Branche
Electronics
Material
  • Better stiffness and toughness enhance
  • Dual locking latch performance
  • Reduce cracking rate down to 0%
  • Lowering system costs

Miniature Circuit Breakers

Branche
Electrical
  • Akulon® PA6 allows for reliable solutions due to up to 30% improved electrical endurance compared to conventional materials
  • Akulon® PA6 allows for more appealing solutions due to enhanced aesthetics
  • Akulon® PA6 allows for system cost reduction up to 15% compared to thermoset compounds due to potential reduction of wall thicknesses by up to 2/3rd and due to potential part integration possibilities

Miniature Circuit Breakers (2)

Branche
Electrical
  • Akulon® PA6 allows for reliable solutions due to up to 30% improved electrical endurance compared to conventional materials
  • Akulon® PA6 allows for more appealing solutions due to enhanced aesthetics
  • Akulon® PA6 allows for system cost reduction up to 15% compared to thermoset compounds due to potential reduction of wall thicknesses by up to 2/3rd and due to potential part integration possibilities

Mobile Phone Mid-Frame

Branche
Electronics
Material
  • Achieves high 45 MPa adhesion with appropriate NMT treated stainless steel / titanium surface
  • Higher thermal stability, which supports higher temp PVD process
  • High PVD processing can improve throughput
  • Greater color selection and better durability of product

Notebook Housings

Branche
Electronics
Material
  • ForTii® PA4T allows for innovative design solutions due to high stiffness at 0.8mm wall thickness and its high flowability enabling thinner walls than possible with PC (whilst keeping the warpage to a minimum)
  • ForTii® PA4T allows for reliable solutions due to its high weld line strength enabling a good performance in drop tests, its high dimensional stability due to relatively low moisture uptake and an isotropic CLTE and due to UL94-V0 certification

Oil Pump Gears (2-wheelers)

Branche
Transportation
  • Stanyl® PA46 allows for light weight solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures in comparison with PA66 and PPA and due to its much better abrasion resistance and lower friction at elevated temperatures in comparison with PA66 and PPA

SMT terminal blocks

Branche
Electrical
Material
  • ForTii® PA4T allows for smarter designs and smaller applications
  • ForTii® PA4T allows for reliable solutions due to good thermo-mechanical performance (very good long term heat ageing) and electrical performance (plug pins are able to handle 240 volts due to excellent creep resistance for instance)
  • ForTii® PA4T allows for cost efficient solutions due to low reject levels in manufacturing process

Molded case circuit breakers

Branche
Electrical
  • Akulon® PA6, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to up-to 30% improved electrical endurance compared to conventional materials
  • Akulon® PA6, Stanyl® PA46 and ForTii® PA4T allow for more appealing solutions due to enhanced aesthetics
  • Akulon® PA6, Stanyl® PA46 and ForTii® PA4T allow for system cost reduction up to 15% compared to thermoset compounds due to potential reduction of wall thicknesses by up to 2/3rd and due to potential part integration possibilities

Motor Starter/Overload Relays

Branche
Electrical
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses

Oil Pump Gears (automotive)

Branche
Automotive
  • Stanyl® PA46 allows for light weight solutions versus metal and it enables compact designs and reduced noise (as much as 20% reduction versus other plastics)
  • Stanyl® PA46 allows for reliable solutions due to its high abrasion resistance (PA46 yields reduced wear (backlash) after 500 hours, and Stanyl® TW241B3 showed 5 microns wear versus 20 microns for PA66) and it yields high safety factors under jamming condition

Positition Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Power Connectors

Branche
Electronics
Material
  • ForTii® PA4T allows for reliable solutions due to its excellent mechanical strength (outperforming other high temperature polyamides or liquid crystal polymers at the wall breakage test), its high CTI (enabling smaller creep resistances and higher power ratings) and due to its flame retardant UL94-V0 classification (even down to wall thicknesses of 0.2mm)
  • ForTii® PA4T allows for cost effective solutions to due good processability and high flowability enabling thin walled designs
  • ForTii® PA4T allow for even more sustainable solutions with reduced environmental impact due to its lower carbon footprint as compared to alternative materials

Sunroof frame

Branche
Automotive
  • Faster injection molding process
  • Holding step eliminated
  • Shorter cooling time
  • Lower weight
  • Lower warpage

T10 LDS sockets

Branche
Automotive
Material
  • LDS solution for auto lighting
  • High design freedom
  • Integration of mechanical and electronics components

Terminal Blocks

Branche
Electrical
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to good mechanical properties at low & high temperatures and due to excellent CTI values

Transmission Control Gears

Branche
Transportation
  • Stanyl® PA46 allows for light weight solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures in comparison with PA66 and PPA and due to its much better abrasion resistance and lower friction at elevated temperatures in comparison with PA66 and PPA

Reflow connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high melting temperatures (allowing the use of high reflow temperatures) and high mechanical performance (implying a reduced reject rate during pin assembly + meeting mechanical specification also after reflow soldering)
  • ForTii® PA4T increases the reliability even due to a high dimensional stability, a low and isotropic CLTE leading to high co-planarity and low warpage after soldering
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to their ease of processability and flowability (enabling thin wall designs)

Reflow connectors (2)

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high melting temperatures (allowing the use of high reflow temperatures) and high mechanical performance (implying a reduced reject rate during pin assembly + meeting mechanical specification also after reflow soldering)
  • ForTii® PA4T increases the reliability even due to a high dimensional stability, a low and isotropic CLTE leading to high co-planarity and low warpage after soldering
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to their ease of processability and flowability (enabling thin wall designs)

Reflow connectors (3)

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high melting temperatures (allowing the use of high reflow temperatures) and high mechanical performance (implying a reduced reject rate during pin assembly + meeting mechanical specification also after reflow soldering)
  • ForTii® PA4T increases the reliability even due to a high dimensional stability, a low and isotropic CLTE leading to high co-planarity and low warpage after soldering
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to their ease of processability and flowability (enabling thin wall designs)

Self propelled lawnmower transmission gears

Branche
Consumer goods
  • Stanyl® PA46 allows for light weight and low NVH solutions compared to metal (weight reduction up to 70%)
  • Stanyl® PA46 allows for cost effective solutions since it lowers integral costs with more than 45% compared to traditional gear sets

Speed Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Start/Stop: Alternator and Starter parts

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance and creep resistance at elevated temperatures, high toughness levels, excellent wear and friction behaviour and good electrical insulation properties
  • ForTii® PA4T allows for reliable solutions due to a very high peakt temperature resistance due to its melting point of 325 C
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs

Temperature Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

USB-C Connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for high reliability in USB connectors due to high HDT's, stiffness and toughness levels, an excellent welding line strength and a CTI rating above 400V
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to their excellent processability and high flowability enabling thin walled designs

WtB and BtB Connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high-heat resistance, a unique balance of high stiffness and good flowability and high strength and creep resistance levels leading to good pin retention
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions to due good processability and high flowability enabling thin walled designs