66 Ergebnisse
Neu

Akulon® PA66-HC12 UD

Polymer
PA66-CF60
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz
Neu

Central Floor

Branche
Automotive
  • The UD tapes based ply-books were thermo-formed to the final shape. The composite part is 18% lighter than state-of-the-art, steel-based designs, while still fulfilling safety requirements.
  • The composite strength and dimensional stability are not affected by the E-coating process.
Neu

Akulon® S223-G6-FC BK00001

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, zugelassen für Lebensmittelkontakt
Neu

Door panel

Branche
Automotive
  • The UD tape products were thermo-formed and glued, which is 60% lighter than state-of-the-art , steel-based designs, while still fulfilling safety requirements.
Neu

Akulon® S223-G6-FC NA99001

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, zugelassen für Lebensmittelkontakt
Neu

Wheel

Branche
Automotive
  • The hybrid wheel-rim is 2 kg lighter and 30% more fatigue-resistant than a steel design, whilst inert to road salts and battery acids.

Akulon® Diablo HDT2500 BK00001

Polymer
PA66-GF35
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, PSA, RENAULT
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert

Air inlet manifolds

Branche
Automotive
  • Akulon® PA6 allows for light weight (40% lighter) and cost effective solutons as compared to metal
  • Akulon® PA6 allows for reliable solutions due to its higher heat ageing resistance and its better welding strength in comparison with PA66
  • Akulon® Ultraflow grades allow for addtional cost effectiveness due to 25% cycle time advantage as compared to standard grades

Akulon® HR-HG6

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Automobil OEM
PSA, RENAULT
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, Hydrolysis resistant

Automotive Connectors (2)

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, EcoPaXX® PA410, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high mechanical property levels and good electrical insulation properties
  • Akulon® PA6 and PA66 allow for cost effective solutions due to high mechanical properties (especially toughness and strength)

Akulon® Diablo HT-HG0

Polymer
(PA66+PA6)-GF50
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, RENAULT
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert

Charge Air Cooler Caps

Branche
Automotive
  • Stanyl® PA46 allows for light weight solutions (40-50% lighter) and more cost effective solutions than metal
  • Stanyl® PA46 allows for reliable solutions due to its better creep/fatigue resistance than PPS and PPA and in case of Stanyl® Diablo due to its excellent long term temperature resistance up to 230°C
  • Akulon® and EcoPaXX® allow for light weight solutions (40-50% lighter) and more cost effective solutions than metal at the cold side.
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

Akulon® Diablo HT-HG6

Polymer
(PA66+PA6)-GF30
Verarbeitung
Injection Molding
Automobil OEM
GM, PSA
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

E-Boxes

Branche
Automotive
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for reliable solutions due to their high temperature resistance (much higher than PP) and due to their good electrical insulation properties
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for cost effective solutions due to their ease of processability

Akulon® S223-G6

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Automobil OEM
MERCEDES
Besondere Merkmale
Mit 30% Glasfasern verstärkt

Fuse Holders

Branche
Automotive
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for reliable solutions due to their high temperature resistance (much higher than PP) and due to their good electrical insulation properties
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for cost effective solutions due to their ease of processability

Akulon® S223-G7

Polymer
PA66-GF35
Verarbeitung
Injection Molding

Industrial Control Gear

Branche
Electrical
  • Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance
  • Akulon® PA6 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses

Akulon® S223-HG0

Polymer
PA66-GF50
Verarbeitung
Injection Molding
Automobil OEM
BMW, JAGUAR LAND ROVER, PSA, RENAULT, VW
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert

Integrated Air Inlet Manifolds (up to 230°C)

Branche
Automotive
  • Stanyl® Diablo and Akulon® Diablo allows for 40% lighter and 20% lower system costs in comparison with metal
  • Stanyl® Diablo allows for reliable solutions due to its long term heat resistance up to 230°C (in absolute strength values better than PPS) and due to its great welding strength (even better than PA6)
  • Akulon® Diablo positioned to be positioned upto 220 ˚C

Akulon® S223-HG6

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Automobil OEM
BMW, GM, MERCEDES, PSA, RENAULT, VW
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Off-road Vehicle Oil Pans and Reservoirs

Branche
Consumer goods
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures and its much better fatigue resistance as compared to PA66 and PPA
  • Stanyl® PA46 allows for cost effective solutions due to its ease of processing, short injection molding cycle times and good flowability

Akulon® S223-HG7

Polymer
PA66-GF35
Verarbeitung
Injection Molding
Automobil OEM
GM, MERCEDES, PSA, RENAULT
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert

Oil Sumps and Pans

Branche
Automotive
  • Akulon® PA6 allows for 40-60% weight reduction and better NVH performance versus metal
  • Akulon® PA6 allows for cost effective solutions versus metal (due to the possibility of function integration) and versus PA66 (PA6 more economical choice)
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® S223-HPG5

Polymer
PA66-I-GF25
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt, schlagzäh-modifiziert, wärmestabilisiert, Schmiermittelbeständig

Hot Charged Air Ducts

Branche
Automotive
  • Stanyl® PA46, Stanyl® Diablo PA46, Akulon® Diablo PA and Arnitel® HT TPC allow for light weight solutions as compared to metal or rubber or alternative plastics (Stanyl® is 10% lighter than PPS)
  • Stanyl® PA46, Stanyl® Diablo PA46, Akulon® Diablo PA and Arnitel® HT TPC allow for cost effective solutions (Stanyl lowers system cost up to 20% versus metal)
  • Stanyl® PA46, Stanyl® Diablo PA46, Akulon® Diablo PA and Arnitel® HT TPC allow for reliable solutions (Stanyl® Diablo is long term resistant up to 230 ˚C, Akulon® Diablo ca be used around 200 ˚C) and Arnitel® HT is ideal as single part solution for flexible hot charge ducts.

Akulon® S240-C

Polymer
PA66
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Zugelassen für Lebensmittelkontakt, hohe Viskosität

Integrated Air Inlet Manifolds (up to 180°C)

Branche
Automotive
  • Akulon® Diablo and Akulon® allow for 40% lighter and 20% lower system costs in comparison with metal
  • Akulon® Diablo and Akulon® allow for reliable solutions due to their long term heat resistance up to 200°C resp 180°C and due to their great welding strength

Akulon® SafeConnect SC21

Polymer
PA66 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Flammwidrig

MCCB Housings

Branche
Electrical
  • Akulon® PA6 and ForTii® PA4T enable increased design flexibility and integrated functionality, facilitating smart assembly solutions
  • Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good dielectric aging performance at 150°C and high CTI values at 600 Volts
  • Akulon® PA6 and ForTii® PA4T allow for potential system cost reductions up to 15% ( wall thicknesses reduced leading to a volume reduction of up to 25%) compared to conventional materials

Akulon® SafeConnect SC22

Polymer
PA66-GF25 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt, flammwidrig

Positition Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Akulon® HR-HG7

Polymer
PA66-GF35
Verarbeitung
Injection Molding
Automobil OEM
PSA, RENAULT
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert, Hydrolysis resistant

Radiator End Caps

Branche
Automotive
Material
  • Akulon® PA66 HR allows for reliable solutions due to its excellent hydrolysis resistance and due to its good thermo-mechanical properties
  • Akulon® PA66 HR allows for light weight solutions (10% lighter compared to PPS)
  • Akulon® PA66 HR allows for very cost effective solutions

Akulon® M-1016

Polymer
PA66-GF33
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 33% Glasfasern verstärkt, wärmestabilisiert

Resonators and ByPass Valves

Branche
Automotive
  • Stanyl® Diablo and Akulon® Diablo allows for 40% lighter and 20% lower system costs in comparison with metal
  • Stanyl® Diablo allows for reliable solutions due to its long term heat resistance up to 230°C (in absolute strength values better than PPS) and due to its great welding strength (even better than PA6)
  • Akulon® Diablo positioned to be positioned upto 220 ˚C

Akulon® PA66-HG12 UD

Polymer
PA66-GF60
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz

Smokable Sausage Casings

Branche
Consumer goods
  • Arnitel® TPC and Akulon® PA6 allow for reliable solutions since they yield excellent smoke penetration leading to great taste and sausage structure and high quality
  • Arnitel® TPC and Akulon® PA6 allow for sustainable solutions, since they are free of substances of hazardous concerns and thus more environmentally friendly than cellulose casings

Akulon® S222

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige Viskosität

Spatulas and Kitchenware

Branche
Consumer goods
  • Stanyl® PA46 and Akulon® PA66 allow reliable solutions, since Stanyl® PA46 offers much higher melting temperature and HDT than PA66 and Akulon® PA66 has significantly higher melting temperature resistance than PP and PA6
  • Stanyl® PA46 allows for cost effective solutions since it offers high flowability enabling very thin wall designs and faster injection moulding cycle times than PA66

Akulon® S223-D

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität, Keimbildner

Terminal Blocks

Branche
Electrical
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to good mechanical properties at low & high temperatures and due to excellent CTI values

Akulon® S223-DH

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität, Keimbildner, wärmestabilisiert

Wheel Speed Sensors

Branche
Automotive
  • EcoPaXX® PA410 allows for reliable solutions due its thermal resistance up to 250°C and better chemical resistance than PA66, its better dimensional stability than PA6 and PA66 due to less moisture uptake
  • EcoPaXX® PA410 allows for very sustainable solutions to its low carbon footprint (70% biobased)
  • Stanyl® PA46 and Akulon® PA66 allow for reliable solutions due to their high melting point of 295 and 260 °C resulting in no deformation at very high sensor tip temperatures

Akulon® S223-E

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität

Speed Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Akulon® S223-EH

Polymer
PA66
Verarbeitung
Injection Molding
Automobil OEM
VW
Besondere Merkmale
Niedrige bis mittlere Viskosität, wärmestabilisiert

Temperature Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Akulon® S223-F

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität

Transmission Oil Pans

Branche
Automotive
  • Akulon® PA6 allows for 40-60% weight reduction and better NVH performance versus metal
  • Akulon® PA6 allows for cost effective solutions versus metal (due to the possibility of function integration) and versus PA66 (PA6 more economical choice)
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® S223-G4U

Polymer
PA66-GF23
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 23% Glasfasern verstärkt

Akulon® S223-HG3

Polymer
PA66-GF15
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 15% Glasfasern verstärkt, wärmestabilisiert

Akulon® S223-KG6

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit Glasfasern verstärkt, wärmestabilisiert

Akulon® S227-C

Polymer
PA66
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Unverstärkt, mittlere Viskosität, geschmiert, zugelassen für Lebensmittelkontakt, Extrusionstype

Akulon® S240-CH Inj-Mold

Polymer
PA66
Verarbeitung
Injection Molding

Akulon® S245-C

Polymer
PA66
Verarbeitung
Blow Molding, Extrusion
Besondere Merkmale
Zugelassen für Lebensmittelkontakt, hohe Viskosität

Akulon® SG-KGS6

Polymer
PA66-GF30 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, Frei von rotem Phosphor und Halogenen

Akulon® SG-KGS6/HV

Polymer
PA66-GF30 FR(40)
Besondere Merkmale
Mit 30% Glasfasern verstärkt, sehr gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen

Novamid® 3010N 5-SL4-3X NAT

Polymer
PA66 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Flammwidrig

Novamid® 3010SR NAT

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Leicht zu verarbeitender Werkstoff

Novamid® 3021GH30 BK629

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Novamid® 3021GH30 NAT

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Nylatron® GS-51

Polymer
PA66-GF32
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER
Besondere Merkmale
Mit 32% Glasfasern verstärkt, MoS2 geschmiert

Nylatron® GS-51-13

Polymer
PA66-GF42
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 42% Glasfasern verstärkt, MoS2 geschmiert

Nylatron® GS-HS

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
MoS2 geschmiert, wärmestabilisiert

Nylatron® NSB-90

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Verbesserte tribologische Eigenschaften