187 Ergebnisse
Neu

Akulon® IG-HG5

Polymer
(PA46+PA6)-GF25
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt, wärmestabilisiert

Shifter fork wear pad

Branche
Automotive
Material
  • Wear life is better than brass components
  • Commercially 40% to 50% better than Brass alloys
  • Plastic wear particles do not harm bearings and other gearbox
  • Stanyl® TW371 is capable of withstanding high PV values
Neu

Akulon® IG-HG7

Polymer
(PA46+PA6)-GF35
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert

Air inlet manifolds

Branche
Automotive
  • Akulon® PA6 allows for light weight (40% lighter) and cost effective solutons as compared to metal
  • Akulon® PA6 allows for reliable solutions due to its higher heat ageing resistance and its better welding strength in comparison with PA66
  • Akulon® Ultraflow grades allow for addtional cost effectiveness due to 25% cycle time advantage as compared to standard grades

Stanyl® TW200F6

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, FIAT CHRYSLER, FORD, GM, PSA, RENAULT, VOLVO
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Aircraft engine panels

Branche
Transportation
  • Stanyl® PA46 allows for reliable solutions due to its high strength in especially at elevated temperatures
  • Stanyl® High Flow PA46 allows for light weight, cost effective solutions enabling thin walled, complex designs

Stanyl® TW341

Polymer
PA46
Verarbeitung
Injection Molding
Automobil OEM
BMW, CALLOUT, FIAT CHRYSLER, FORD, GM, JAGUAR LAND ROVER, MERCEDES, PSA, VOLVO
Besondere Merkmale
Wärmestabilisiert, geschmiert

Arc Chamber

Branche
Electrical
Material
  • Releasing of gases which cool the arc rapidly
  • Stanyl® offers high thermomechanical withstandability
  • Stanyl® enables snap fitting
  • Stanyl® allows easier production and recyclable

Stanyl® TW241F10

Polymer
PA46-GF50
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, FORD, GM, VOLVO
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert, geschmiert

Audio Jack Connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to its outstanding mechanical strength outperforming competitive materials for jacks by up to four times, therefore enabling 20.000-plus insertion/extraction cycles
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions to due good processability and high flowability enabling thin walled designs

Stanyl® TE200F6

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Automobil OEM
GM
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Automotive Bearing Cages

Branche
Automotive
  • Stanyl® PA46 allows for lightweight and cost effective solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its better temperature resistance and weldline performance as compared to PA66and PPA, its higher creep & fatigue resistance in comparison with PA66 and PPA
  • S tanyl® PA46 allows for cost effective solutons due to faster cycle times in comparison with PA66 and PPA

Stanyl® Diablo HDT2700

Polymer
PA46-GF40
Verarbeitung
Injection Molding
Automobil OEM
PSA, RENAULT
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert

Bike Body Plugs

Branche
Transportation
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures in comparison with PA66 and PPA and due to its much better abrasion resistance and lower friction at elevated temperatures in comparison with PA66 and PPA

Stanyl® TW241F6

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Automobil OEM
BMW
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, geschmiert

Brushholders (electrical components)

Branche
Electrical
  • Stanyl® PA46 allows for reliable solutions due to good mechanical properties at low and elevated temperatures, HDT 290°C, excellent CTI values and arc resistance values, UL146 class F (unreinforced) and class H (reinforced grades)
  • Stanyl® PA46 allows for cost effective solutions due to much shorter molding cycle times as compared to most competitive materials

Stanyl® TS200F6

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt

Automotive Connectors

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, EcoPaXX® PA410, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high mechanical property levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Stanyl® TS250F6D

Polymer
PA46-GF30 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, flammwidrig, wärmestabilisiert, verbesserter Widerstand gegen Blasenbildung während des Reflow-Lötens

Automotive e-motor Bobbins

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance (UL1446 class H certified) and creep resistance at elevated temperatures, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a good flowability and processability enabling therefore thin wall designs
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

Stanyl® 46HF5040

Polymer
PA46-GF40 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert, flammwidrig, sehr gute Fließfähigkeit

Battery Connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high-heat resistance, a unique balance of high stiffness and good flowability and high strength and creep resistance levels leading to good pin retention
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions to due good processability and high flowability enabling thin walled designs

Stanyl® TW241B3

Polymer
PA46-CF15
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 15% Kohlenstoff-Fasern verstärkt, wärmestabilisiert, geschmiert

Bobbins

Branche
Electrical
  • Stanyl® PA46 allows for reliable solutions due to good creep resistance and good electrical properties (UL146 class F certified (unreinforced) and class H (reinforced grades)
  • Akulon® PA6 and Stanyl® PA46 allow for cost efficient solutions due to high toughness levels resulting in low reject levels in winding process and due to excellent flowability enabling thin wall designs
  • Arnite T (PBT) and Arnite A (PET) allow for reliable solutions due to good electrical properties especially at elevated temperatures and due to excellent dimensional stability

Stanyl® TW271F6

Polymer
(PA46+PTFE)-GF30
Verarbeitung
Injection Molding
Automobil OEM
GM
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, verbesserte tribologische Eigenschaften

Brushholders (electro motors)

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance (UL1446 class H certified) and creep resistance at elevated temperatures, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a good flowability and processability enabling therefore thin wall designs
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

Stanyl® HGR2 BK00001

Polymer
(PA46+PTFE)
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, FIAT CHRYSLER
Besondere Merkmale
Wärmestabilisiert, verbesserte tribologische Eigenschaften

Cable Ties

Branche
Consumer goods
Material
  • Stanyl® PA46 allows for reliable solutions due to its combination of high peak temperature resistance, good flexibility and good creep resistance (better than PA66)
  • PA46 allows for a higher productivity rate than PA66 due to lower injection molding cycle times

Stanyl® TW371

Polymer
(PA46+PTFE)
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, GM, PSA
Besondere Merkmale
Wärmestabilisiert, verbesserte tribologische Eigenschaften

Chain Tensioners

Branche
Transportation
  • Stanyl® PA46 allows for light weight solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures in comparison with PA66 and PPA and due to its much better abrasion resistance and lower friction at elevated temperatures in comparison with PA66 and PPA

Stanyl® TW441

Polymer
PA46
Verarbeitung
Extrusion, Injection Molding
Automobil OEM
FIAT CHRYSLER
Besondere Merkmale
Hohe Viskosität, wärmestabilisiert, geschmiert

Convoluted Tubes

Branche
Industrial equipment
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness)
  • Stanyl® PA46 allows for reliable solutions due to its better temperature resistance in comparison with PA66

Stanyl® TW363

Polymer
PA46-I
Verarbeitung
Extrusion, Injection Molding
Automobil OEM
CALLOUT, FIAT CHRYSLER, GM, VOLVO
Besondere Merkmale
Wärmestabilisiert, schlagzäh-modifiziert

Crankshaft Balance Gears

Branche
Automotive
  • Stanyl® PA46 allows for 40% lightweight (additional CO₂ reduction through improved moments of inertia) and 35% more cost effective solutions versus metal and it provides a significant reduction in rattling noise of gears in comparison with metal gears
  • Stanyl® PA46 is more cost effective in comparison with PEEK

Stanyl® HFX31S

Polymer
PA46-GF20 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 20% Glasfasern verstärkt, sehr gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen

CRB Cap

Branche
Automotive
Material
  • Isolation of metal to metal contact aids in noise reduction
  • Wear and durability characteristics are 3 times better in relation with competitive wear resistant grades
  • Uneven wear of diaphragm spring fingers is nullified, eliminating premature failure of the clutch assembly
  • CRB flange hardness requirement can be reduced and hardening process for the bearing flange can be eliminated

Stanyl® HFX61S

Polymer
PA46-GF35 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt, sehr gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen

Charge Air Cooler Caps

Branche
Automotive
  • Stanyl® PA46 allows for light weight solutions (40-50% lighter) and more cost effective solutions than metal
  • Stanyl® PA46 allows for reliable solutions due to its better creep/fatigue resistance than PPS and PPA and in case of Stanyl® Diablo due to its excellent long term temperature resistance up to 230°C
  • Akulon® and EcoPaXX® allow for light weight solutions (40-50% lighter) and more cost effective solutions than metal at the cold side.
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

Stanyl® HFX82S

Polymer
PA46-GF45 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 45% Glasfasern verstärkt, Frei von rotem Phosphor und Halogenen

Coil insulation

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance (UL1446 class H certified) and creep resistance at elevated temperatures, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a good flowability and processability enabling therefore thin wall designs
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

Stanyl® HFX33S

Polymer
PA46-GF20 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 20% Glasfasern verstärkt, sehr gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen

Crankshaft Covers

Branche
Automotive
  • ForTii® PA4T, Stanyl® PA46 and EcoPaXX® PA410 allow for light weight solutions (50% less weight compared to metal) and for cost effective solutions (up to 25% lower system/part costs compared to metal)
  • ForTii® PA4T, Stanyl® PA46 and EcoPaXX® PA410 allow for reliable solutions due to good compatibility with FKM/LSR rubbers and to good creep&fatigue resistance in case of Stanyl® and to good temperature resistance up to 150-200°C in case of ForTii® and EcoPaXX®
  • Xytron™PPS can provide lots of benefits on creep, fatigue&oil resistance, even at elevated temperature.

Stanyl® HFX31SW

Polymer
PA46-GF20 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 20% Glasfasern verstärkt, sehr gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen

CRB Housing

Branche
Automotive
  • Weight reduction which leads to a reduced load on the CRB sleeve, which improves lifetime of the sleeve multifold
  • Smooth operation and reduced clutch as a result of weight reduction
  • Simplified assembly procedure due to weight reduction

Stanyl® TS271A1

Polymer
PA46-AF
Verarbeitung
Injection Molding
Besondere Merkmale
Mit Aramidfasern verstärkt, verbesserte tribologische Eigenschaften

CVT Transmission Systems: Scoop Snubbers

Branche
Automotive
Material
  • Stanyl® TW341 PA46 allows for sustainable solutions (up to 1 g/km lower CO₂ emissions) because of lower friction coefficients at elevated temperatures compared to PA66
  • Stanyl® PA46 allows for reliable solutions (7 times longer life time) due its higher abrasion resistance in comparison with PA66
  • Stanyl® PA46 allows for cost effective solutions due to faster cycle times in comparison with PA66

Stanyl® TS272A1

Polymer
PA46-AF
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, GM
Besondere Merkmale
Mit Aramidfasern verstärkt, verbesserte tribologische Eigenschaften

DDR DIMM Connectors

Branche
Electronics
  • ForTii® PA4T allows for reliable solutions due to its excellent stiffness and high deflection temperature under load (HDT) and its excellent low warpage behaviour after reflow soldering, outperforming Liquid Crystal Polymer (LCPs) and polyphthalamides (PPAs)
  • ForTii® enables DDR manufacturers to produce more cost effective applications with reduced weight and height, enabling easy rework at lower temperature loads, with fewer heat traps and better thermal airflow
  • ForTii® PA4T allows for sustainable solutions due to its good carbon footprint and due the use of halogen and red-phosphorous free flameretardants

Stanyl® TW271B3

Polymer
(PA46+PTFE)-CF15
Verarbeitung
Injection Molding
Automobil OEM
GM, PSA
Besondere Merkmale
Mit 15% Kohlenstoff-Fasern verstärkt, wärmestabilisiert, verbesserte tribologische Eigenschaften

Door checker

Branche
Automotive
Material
  • Stanyl® offers Improved wear and friction
  • Application used in door checker with higher loads
  • Stanyl® allows for simplification of design and a compact design

Stanyl® TW271B6

Polymer
(PA46+PTFE)-CF30
Verarbeitung
Injection Molding
Automobil OEM
GM
Besondere Merkmale
Mit 30% Kohlenstoff-Fasern verstärkt, wärmestabilisiert, verbesserte tribologische Eigenschaften

DRL sockets

Branche
Automotive
Material
  • High temperature resistance
  • Low outgassing
  • High creep and heat ageing performance

Stanyl® TW272B6

Polymer
(PA46+PTFE)-CF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Kohlenstoff-Fasern verstärkt, wärmestabilisiert, verbesserte tribologische Eigenschaften

E-Boxes

Branche
Automotive
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for reliable solutions due to their high temperature resistance (much higher than PP) and due to their good electrical insulation properties
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for cost effective solutions due to their ease of processability

Stanyl® TW278F10

Polymer
(PA46+PTFE)-GF50
Verarbeitung
Injection Molding
Automobil OEM
GM
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert, verbesserte tribologische Eigenschaften

EGR mixing tube

Branche
Automotive
  • High temperature resistance
  • EGR resistance
  • Long term high temperature resistance

Stanyl® TW241F12

Polymer
PA46-GF60
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, GM
Besondere Merkmale
Mit 60% Glasfasern verstärkt, wärmestabilisiert, gute Fließfähigkeit

EGR sensor

Branche
Automotive
  • ForTii® PA4T and Stanyl® PA46 allow for reliable solutions due to their high melting point of 325 and 295 °C resulting in no deformation at very high sensor tip temperatures and to their resistance to erosion from contamination in the exhaust stream
  • ForTii® PA4T and Stanyl® PA4 allow for cost effective solutions versus PEEK, LCP or other PPA

Stanyl® TW200F8

Polymer
PA46-GF40
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, FORD, GM, VOLVO
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert

Endlaminates (electrical components)

Branche
Electrical
  • Stanyl® PA46 allows for reliable solutions due to good creep resistance and good electrical properties (UL146 class F certified (unreinforced) and class H (reinforced grades)
  • Stanyl® PA46 allows for cost efficient solutions due to high toughness levels resulting in low reject levels in winding process and due to excellent flowability enabling thin wall designs

Stanyl® TW200F3

Polymer
PA46-GF15
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, GM
Besondere Merkmale
Mit 15% Glasfasern verstärkt, wärmestabilisiert

Endlaminates (electro motors)

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance (UL1446 class H certified) and creep resistance at elevated temperatures, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a good flowability and processability enabling therefore thin wall designs
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

Stanyl® TE373

Polymer
PA46
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, GM
Besondere Merkmale
Wärmestabilisiert, verbesserte tribologische Eigenschaften

EPS gears

Branche
Automotive
  • Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH
  • Stanyl® PA46 allows for reliable solutions due to its superiority in fatigue performance as compared to PA66
  • Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA

Stanyl® TW200B6

Polymer
PA46-CF30
Verarbeitung
Injection Molding
Automobil OEM
GM
Besondere Merkmale
Mit 30% Kohlenstoff-Fasern verstärkt, wärmestabilisiert, geschmiert

EPS Steering components: Gears, Flex couplers and Sensors

Branche
Automotive
  • Stanyl® PA46 allows for light weight solutions (17% less weight than a metal alternative) and for sustainable solutions (NVH significant lower compared to metal)
  • Stanyl PA46 allows for reliable solutions due to its low friction and high abrasion resistance performance

Stanyl® TE250F9

Polymer
PA46-GF45 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 45% Glasfasern verstärkt, wärmestabilisiert, flammwidrig

Firefighter helmets

Branche
Consumer goods
Material
  • Stanyl® PA46 allows for lightweight and reliable solutions, since it withstands temperatures up to 250°C, yields an extreme good impact resistance and is available in flame retardant versions

Stanyl® Diablo OCD2305 BM

Polymer
PA46-GF25
Verarbeitung
Blow Molding, Injection Molding
Automobil OEM
CALLOUT, FIAT CHRYSLER, RENAULT
Besondere Merkmale
Mit Glasfasern verstärkt, wärmestabilisiert, Blasformtype

FPC connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to high stiffness even at elevated lead-free reflow assembly temperatures with hot spots up to 300°C
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to very low warpage levels to minimizing rejects significantly therefore
  • ForTii® PA4T allow for even more sustainable solutions with reduced environmental impact due to its lower carbon footprint as compared to alternative materials

Stanyl® TC502

Polymer
PA46
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmeleitfähiger Werkstoff

Front End Accessory Drive Parts: Belt Tensioner,Damping bands, Shoes and Bushings

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions (Extended Tensioner Life, Reduced / eliminated warranty claims) due to its unmatched dry running wear & friction performance at elevated temperatures, its damping capability (consistent Frictional Properties Minimal or no slip / stick), its superior creep Resistance at elevated temperatures
  • Stanyl® PA46 allows for new posible designs

Stanyl® TC170

Polymer
PA46-GF20
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmeleitfähiger Werkstoff, mit 20% Glasfasern verstärkt, mit Laser beschreibbar

Fuel System: Various Components

Branche
Automotive
  • EcoPaXX® PA410, Stanyl® PA46 and Akulon® PA6 allow for reliable solutions due to their high resistance and impermeability to conventional gasoline fuel (E10) as well as to the more sustainable E85 fuel and to their good mechanical properties at various temperatures

Akulon® IG-HG10

Polymer
(PA46+PA6)-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert

Fuse Holders

Branche
Automotive
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for reliable solutions due to their high temperature resistance (much higher than PP) and due to their good electrical insulation properties
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for cost effective solutions due to their ease of processability

Akulon® IG-UH (P755D)

Polymer
(PA46+PA6)
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert, geschmiert

Golf Shoe Receptacles

Branche
Consumer goods
Material
  • Stanyl® PA46 allows for reliable and cost effective solutions due to its excellent thermo-mechanical characteristict enabling, unlike POM, no deformation of the part under the high vulcanisation pressure, and leading to a lower scrap rate of the entire sole

Stanyl® 46HF4130

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit

Hair Curler Brushes

Branche
Consumer goods
Material
  • Stanyl® PA46 allows for reliable solutions due to much higher HDT levels than PA66
  • Stanyl® PA46 allows for cost effective solutions due to its good processability (much easier to process than PPS) and due to its high flowability (enabling very thin wall designs therefore)

Stanyl® 46HF4530

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit, für Anwendungen im E&E Bereich

Heat Sinks in LED Lamps

Branche
Consumer goods
  • Stanyl® TC PA46 reduces the weight of heat sinks with 50% compared to aluminium
  • Stanyl® TC PA46 allows for high level of design freedom compared to metal and yields 85% lower CO₂ footprint than with an equivalent die cast aluminium heat sinks
  • Stanyl® TC PA46 allows for reliable solutions due to its thermoconductivity (portfolio of several thermal conductive grades available)

Stanyl® 46HF5050

Polymer
PA46-GF50 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert, flammwidrig, sehr gute Fließfähigkeit

Hot Charged Air Ducts

Branche
Automotive
  • Stanyl® PA46, Stanyl® Diablo PA46, Akulon® Diablo PA and Arnitel® HT TPC allow for light weight solutions as compared to metal or rubber or alternative plastics (Stanyl® is 10% lighter than PPS)
  • Stanyl® PA46, Stanyl® Diablo PA46, Akulon® Diablo PA and Arnitel® HT TPC allow for cost effective solutions (Stanyl lowers system cost up to 20% versus metal)
  • Stanyl® PA46, Stanyl® Diablo PA46, Akulon® Diablo PA and Arnitel® HT TPC allow for reliable solutions (Stanyl® Diablo is long term resistant up to 230 ˚C, Akulon® Diablo ca be used around 200 ˚C) and Arnitel® HT is ideal as single part solution for flexible hot charge ducts.

Stanyl® 46SF5030

Polymer
PA46-GF30 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, flammwidrig, sehr gute Fließfähigkeit

Integrated Air Inlet Manifolds (up to 230°C)

Branche
Automotive
  • Stanyl® Diablo and Akulon® Diablo allows for 40% lighter and 20% lower system costs in comparison with metal
  • Stanyl® Diablo allows for reliable solutions due to its long term heat resistance up to 230°C (in absolute strength values better than PPS) and due to its great welding strength (even better than PA6)
  • Akulon® Diablo positioned to be positioned upto 220 ˚C

Stanyl® CR310

Polymer
PA46-GF30 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, sehr gute Fließfähigkeit, flammwidrig, Frei von rotem Phosphor und Halogenen

Ironing Components

Branche
Consumer goods
Material
  • Stanyl® PA46 allows for light weight solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures in comparison with PA66 and PPA and due to its much better abrasion resistance and lower friction at elevated temperatures in comparison with PA66 and PPA

Stanyl® Diablo OCD2100 BK27021

Polymer
PA46-GF40
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, FIAT CHRYSLER, GM, PSA, RENAULT
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert

Jet engine part

Branche
Transportation
  • Stanyl® PA46 allows for light weight solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its high impact properties over a wide temperature range and its much better abrasion resistance and lower friction at elevated temperatures than PA66
  • Stanyl® HF (High Flow) grades allows for very thin walled designs

Stanyl® Diablo OCD2300 BLK

Polymer
PA46-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert

Kitchen appliance gears, dishwasher proof

Branche
Consumer goods
  • Stanyl® PA46 allows for reliable solutions due to its good resistance to permanent deformation when temperatures due to friction exceed 100°C, its good retention of gear accuracy at elevated temperatures and during highly loaded conditions and its resistance to variable loading via multi-function operations

Stanyl® HFX31SW WT94001

Polymer
PA46-GF20 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 20% Glasfasern verstärkt, sehr gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen

Lawnmower Muffler Components

Branche
Consumer goods
Material
  • Stanyl® PA46 allows for reliable solutions, since it can handle elevated temperatures, while retaining almost all of its impact strength at these elevated temperatures, unlike many other high temperature polyamides (Impact strength is severely required when the covers are dropped and transported)

Stanyl® HFX63S

Polymer
PA46-GF35 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt, sehr gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen

Lawnmower Trimmer Muffler

Branche
Consumer goods
Material
  • Stanyl® PA46 allows for reliable solutions, since it can handle elevated temperatures, while retaining almost all of its impact strength at these elevated temperatures, unlike many other high temperature polyamides (Impact strength is severely required when the covers are dropped and transported)

Stanyl® HGR1

Polymer
PA46
Automobil OEM
FIAT CHRYSLER
Besondere Merkmale
Wärmestabilisiert, verbesserte tribologische Eigenschaften

LED Headlight Lighting Modules and Lensholders

Branche
Automotive
  • Arnite® XL-T allows for reliable solutions due to its heat deflection temperature (HDT) of 250°C, its thermoconductivity and its low outgassing and excellent textured surface finish in dark colours implying high design freedom
  • Arnite® XL-T allows for cost effective and light weight solutions as compared to PES, PEI and PPA, since aluminum heatshields are not necessary when using XL-T

Stanyl® MC50

Polymer
PA46-GF35 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt, flammwidrig (halogen- u. phosphorfrei)

Miniature Circuit Breakers (2)

Branche
Electrical
  • Akulon® PA6 allows for reliable solutions due to up to 30% improved electrical endurance compared to conventional materials
  • Akulon® PA6 allows for more appealing solutions due to enhanced aesthetics
  • Akulon® PA6 allows for system cost reduction up to 15% compared to thermoset compounds due to potential reduction of wall thicknesses by up to 2/3rd and due to potential part integration possibilities

Stanyl® MC51

Polymer
PA46-GF35 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt, sehr gute Fließfähigkeit, flammwidrig (halogen- u. phosphorfrei)

Molded case circuit breakers

Branche
Electrical
  • Akulon® PA6, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to up-to 30% improved electrical endurance compared to conventional materials
  • Akulon® PA6, Stanyl® PA46 and ForTii® PA4T allow for more appealing solutions due to enhanced aesthetics
  • Akulon® PA6, Stanyl® PA46 and ForTii® PA4T allow for system cost reduction up to 15% compared to thermoset compounds due to potential reduction of wall thicknesses by up to 2/3rd and due to potential part integration possibilities

Stanyl® SC50

Polymer
PA46-GF30 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, flammwidrig, Frei von rotem Phosphor und Halogenen

Motor Starter/Overload Relays

Branche
Electrical
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses

Stanyl® TC153

Polymer
PA46 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmeleitfähiger Werkstoff, flammwidrig, wärmestabilisiert

MTF/DMF Components

Branche
Automotive
  • Stanyl® PA46 allows for lightweight solutions versus metal and cost effective solutions versus PEEK
  • Stanyl® PA46 allows for reliable solutions due to its excellent wear performance with low or high friction, best in class mechanical properties (combination with high stiffness, good fatigue and ductility at high and low temperatures) and its chemical resistance against used greases and oils

Stanyl® TC154

Polymer
PA46 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmeleitfähiger Werkstoff, flammwidrig, wärmestabilisiert

New Generation Slide Shoe Surfaces

Branche
Automotive
  • Stanyl® TW371 PA46 allows for sustainable solutions (up to 1 g/km lower CO₂ emissions) because of lower friction coefficients at elevated temperatures compared to PA66
  • Stanyl® TW371 PA46 allows for reliable solutions (7 times longer life time) due its higher abrasion resistance in comparison with PA66
  • Stanyl® PA46 allows for cost effective solutions due to faster cycle times in comparison with PA66
  • Stanyl® HGR1 produces lower frictional torque in comparison with any other material (e.g. PA66) at relatively low engine speeds ranging from idle to 1800 rpm.
  • Stanyl® HGR1 also performs well at vehicle cruise speeds
  • Stanyl® HGR1 will provide OEM's with a very cost-effective tool for reducing fuel consumption

Stanyl® TC155

Polymer
PA46 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmeleitfähiger Werkstoff, flammwidrig, wärmestabilisiert

Off-road Vehicle Oil Pans and Reservoirs

Branche
Consumer goods
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures and its much better fatigue resistance as compared to PA66 and PPA
  • Stanyl® PA46 allows for cost effective solutions due to its ease of processing, short injection molding cycle times and good flowability

Stanyl® TC168 (NC239B)

Polymer
PA46-GF20 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmeleitfähiger Werkstoff, flammwidrig, wärmestabilisiert, mit 20% Glasfasern verstärkt

Oil Pump Gears (2-wheelers)

Branche
Transportation
  • Stanyl® PA46 allows for light weight solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures in comparison with PA66 and PPA and due to its much better abrasion resistance and lower friction at elevated temperatures in comparison with PA66 and PPA

Stanyl® TC551

Polymer
PA46 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmeleitfähiger Werkstoff, flammwidrig

Pipe Fittings

Branche
Building & construction
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiff and tough) and its better surface appearance than PA66
  • Stanyl® PA46 allows for more economical and reliable solutions than PES or PPSU also as a result of a very good creep resistance at elevated temperatures
  • Xytron™ PPS can provide super hydrolysis.

Stanyl® TE200F6-FC

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, zugelassen für Lebensmittelkontakt

Power Door Actuators

Branche
Automotive
  • Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH
  • Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM
  • Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA

Stanyl® TE200F6-FC BK27024

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, zugelassen für Lebensmittelkontakt

Oil Pump Gears (automotive)

Branche
Automotive
  • Stanyl® PA46 allows for light weight solutions versus metal and it enables compact designs and reduced noise (as much as 20% reduction versus other plastics)
  • Stanyl® PA46 allows for reliable solutions due to its high abrasion resistance (PA46 yields reduced wear (backlash) after 500 hours, and Stanyl® TW241B3 showed 5 microns wear versus 20 microns for PA66) and it yields high safety factors under jamming condition

Stanyl® TE200F8

Polymer
PA46-GF40
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert, für Anwendungen im E&E Bereich

Positition Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Stanyl® TE200S6

Polymer
PA46-GB30
Verarbeitung
Injection Molding
Automobil OEM
FORD
Besondere Merkmale
Mit 30% Glaskugeln verstärkt, wärmestabilisiert, geringe Verzugsneigung

Power Lift Gate Actuators

Branche
Automotive
  • Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH
  • Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM
  • Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA

Stanyl® TE248F6

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, UV stabilisiert

Power Seats

Branche
Automotive
  • Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH
  • Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM
  • Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA

Stanyl® TE250F3

Polymer
PA46-GF15 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 15% Glasfasern verstärkt, wärmestabilisiert, flammwidrig

Power Window Actuators

Branche
Automotive
  • Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH
  • Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM
  • Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA

Stanyl® TE250F6

Polymer
PA46-GF30 FR(17)
Verarbeitung
Injection Molding
Automobil OEM
FORD
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, flammwidrig

Reflow connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high melting temperatures (allowing the use of high reflow temperatures) and high mechanical performance (implying a reduced reject rate during pin assembly + meeting mechanical specification also after reflow soldering)
  • ForTii® PA4T increases the reliability even due to a high dimensional stability, a low and isotropic CLTE leading to high co-planarity and low warpage after soldering
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to their ease of processability and flowability (enabling thin wall designs)

Stanyl® TE250F8

Polymer
PA46-GF40 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert, flammwidrig

Reflow connectors (2)

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high melting temperatures (allowing the use of high reflow temperatures) and high mechanical performance (implying a reduced reject rate during pin assembly + meeting mechanical specification also after reflow soldering)
  • ForTii® PA4T increases the reliability even due to a high dimensional stability, a low and isotropic CLTE leading to high co-planarity and low warpage after soldering
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to their ease of processability and flowability (enabling thin wall designs)

Stanyl® TE300

Polymer
PA46
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert

Relay Bases

Branche
Electrical
Material
  • Stanyl® PA46 allows for reliable solutions due to good mechanical properties at low and elevated temperatures, HDT 290°C suitable thus for SMT, excellent CTI values and arc resistance values, UL146 class F (unreinforced) and class H (reinforced grades)
  • Stanyl® PA46 allows for cost effective solutions due to much shorter molding cycle times as compared to most competitive materials

Stanyl® TE341

Polymer
PA46
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert, geschmiert

Resonators and ByPass Valves

Branche
Automotive
  • Stanyl® Diablo and Akulon® Diablo allows for 40% lighter and 20% lower system costs in comparison with metal
  • Stanyl® Diablo allows for reliable solutions due to its long term heat resistance up to 230°C (in absolute strength values better than PPS) and due to its great welding strength (even better than PA6)
  • Akulon® Diablo positioned to be positioned upto 220 ˚C

Stanyl® TE351

Polymer
PA46 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Flammwidrig, wärmestabilisiert

Rod Guides

Branche
Energy
  • Stanyl® PA46 allows for light weight and more economical solutions as compared to metal
  • Stanyl® PA46 allows for reliable solutions due to its higher abrasion resistance and lower friction at elevated temperatures in comparison with PA66
  • Xytron™ PPS can provide high stiffness and super chemical resistance.

Stanyl® TQ300

Polymer
PA46
Verarbeitung
Injection Molding
Automobil OEM
FORD, MERCEDES

Reflow connectors (3)

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high melting temperatures (allowing the use of high reflow temperatures) and high mechanical performance (implying a reduced reject rate during pin assembly + meeting mechanical specification also after reflow soldering)
  • ForTii® PA4T increases the reliability even due to a high dimensional stability, a low and isotropic CLTE leading to high co-planarity and low warpage after soldering
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to their ease of processability and flowability (enabling thin wall designs)

Stanyl® TQ300F5

Polymer
PA46-GF25
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt, wärmestabilisiert

Self propelled lawnmower transmission gears

Branche
Consumer goods
  • Stanyl® PA46 allows for light weight and low NVH solutions compared to metal (weight reduction up to 70%)
  • Stanyl® PA46 allows for cost effective solutions since it lowers integral costs with more than 45% compared to traditional gear sets

Stanyl® TS200B3

Polymer
PA46-CF15
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 15% Kohlenstoff-Fasern verstärkt

Slide Shoe Surfaces in new generation

Branche
Automotive
  • Stanyl® PA46 HGR2 allows for very sustainable solutions, since they enable lower frictional torque in comparison with any other material (e.g. PA66) at relatively low engine speeds ranging from idle to 1800 rpm (Stanyl® HGR2 will provide OEM's with a very cost-effective tool for reducing fuel consumption)
  • Stanyl® PA46 allows for reliable solutions due to its high abrasion resistance (7 times better than PA66)

Stanyl® TS200F10

Polymer
PA46-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt

Small domestic appliance gears

Branche
Consumer goods
Material
  • Stanyl®PA46 allows for reliable solutions, since it enables due to its excellent thermo-mechanical characteristics high motor speeds (proven 24,000 rpm, proven high loads over 20 hours of ice chopping in durability tests for mixers and blenders) and extended warranties of three years and beyond

Stanyl® TS241B3

Polymer
PA46-CF15
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 15% Kohlenstoff-Fasern verstärkt, geschmiert

Spatulas and Kitchenware

Branche
Consumer goods
  • Stanyl® PA46 and Akulon® PA66 allow reliable solutions, since Stanyl® PA46 offers much higher melting temperature and HDT than PA66 and Akulon® PA66 has significantly higher melting temperature resistance than PP and PA6
  • Stanyl® PA46 allows for cost effective solutions since it offers high flowability enabling very thin wall designs and faster injection moulding cycle times than PA66

Stanyl® TS250F4D

Polymer
PA46-GF20 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 20% Glasfasern verstärkt, flammwidrig, wärmestabilisiert, verbesserter Widerstand gegen Blasenbildung während des Reflow-Lötens

Speed Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Stanyl® TS250F8

Polymer
PA46-GF40 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, flammwidrig, wärmestabilisiert

Suspension System Top Mounts

Branche
Automotive
  • Akulon® (UltraFlow) PA6 and Stanyl® PA46 yield up to 50% weight reduction and a NVH advantage versus metal
  • Akulon® (UltraFlow) PA6 and Stanyl® PA46 allow for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts
  • Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF
  • Stanyl® PA46 allows for a more cost effective solution than PPA and PPS

Stanyl® TS250FK33

Polymer
PA46-(GF+MF)30 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern/Mineral verstärkt, flammwidrig, geringe Verzugsneigung

Terminal Blocks

Branche
Electrical
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to good mechanical properties at low & high temperatures and due to excellent CTI values

Stanyl® TS271P4

Polymer
PA46-MF20
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 20% Whiskers verstärkt, verbesserte tribologische Eigenschaften

Thermostatic Controls

Branche
Electrical
Material
  • Stanyl® PA46 allows for reliable solutions due to its excellent resistance to peak temperatures up to 280°C, its good electrical insulation properties with a RTI > 100°C, its proven stiffness at high temperatures and its fatigue resistance at high temperatures

Stanyl® TS300

Polymer
PA46
Verarbeitung
Injection Molding

Torque Convertor Components

Branche
Automotive
  • Stanyl® PA46 allows for lightweight and cost effective solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its excellent wear performance (longer life times because of higher abrasion resistance with PA46 versus PA66, PPA), best in class mechanical properties (outperforms PPA and PPS in mechanical properties at elevated temperatures, specific strength comparable to die-cast aluminium at 200°C) and its chemical resistance against used greases and oils

Stanyl® TS341

Polymer
PA46
Verarbeitung
Injection Molding

Start/Stop: Alternator and Starter parts

Branche
Automotive
  • Stanyl® PA46 allows for reliable solutions due to a high temperature resistance and creep resistance at elevated temperatures, high toughness levels, excellent wear and friction behaviour and good electrical insulation properties
  • ForTii® PA4T allows for reliable solutions due to a very high peakt temperature resistance due to its melting point of 325 C
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs

Stanyl® TS341-N

Polymer
PA46
Verarbeitung
Injection Molding

Temperature Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Stanyl® TS350

Polymer
PA46 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Unverstärkt, flammwidrig

Timing chain tensioner

Branche
Automotive
  • Stanyl® PA46 allows for sustainable solutions (up to 1 g/km lower CO₂ emissions) because of lower friction coefficients at elevated temperatures compared to PA66
  • Stanyl® PA46 allows for reliable solutions (7 times longer life time) due its higher abrasion resistance in comparison with PA66
  • Stanyl® PA46 allows for cost effective solutions due to faster cycle times in comparison with PA66

Stanyl® TW209F8

Polymer
PA46-GF40
Verarbeitung
Injection Molding
Besondere Merkmale
Mit Glasfasern verstärkt, wärmestabilisiert, Spritzguss

Timing Chain Tensioner Surfaces

Branche
Automotive
  • Stanyl® TW341 PA46 allows for sustainable solutions (up to 1 g/km lower CO₂ emissions) because of lower friction coefficients at elevated temperatures compared to PA66
  • Stanyl® PA46 allows for reliable solutions (7 times longer life time) due its higher abrasion resistance in comparison with PA66
  • Stanyl® PA46 allows for cost effective solutions due to faster cycle times in comparison with PA66

Stanyl® TW241F3

Polymer
PA46-GF15
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, FIAT CHRYSLER, GM
Besondere Merkmale
Mit 15% Glasfasern verstärkt, wärmestabilisiert, geschmiert

Tractor Engine Transmission Components

Branche
Industrial equipment
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties and better fatigue resistance at elevated temperatures than PA66 and PPA
  • Stanyl® PA46 allows for cost effective solutions due to short injection molding cycle times and its high flowability enabling thin walled designs

Stanyl® TW241F5

Polymer
PA46-GF25
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert, mit 25% Glasfasern verstärkt, geschmiert

Transmission Control Gears

Branche
Transportation
  • Stanyl® PA46 allows for light weight solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures in comparison with PA66 and PPA and due to its much better abrasion resistance and lower friction at elevated temperatures in comparison with PA66 and PPA

Stanyl® TW241F8

Polymer
PA46-GF40
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert, geschmiert

USB-C Connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for high reliability in USB connectors due to high HDT's, stiffness and toughness levels, an excellent welding line strength and a CTI rating above 400V
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions due to their excellent processability and high flowability enabling thin walled designs

Stanyl® TW242FM10

Polymer
PA46-(GF+MF)50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern/Mineral verstärkt, wärmestabilisiert

Variator Roller Cover

Branche
Transportation
  • Stanyl® PA46 allows for light weight solutions versus metal
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures in comparison with PA66 and PPA and due to its much better abrasion resistance and lower friction at elevated temperatures in comparison with PA66 and PPA

Stanyl® TW250F6

Polymer
PA46-GF30 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, flammwidrig

Wheel Speed Sensors

Branche
Automotive
  • EcoPaXX® PA410 allows for reliable solutions due its thermal resistance up to 250°C and better chemical resistance than PA66, its better dimensional stability than PA6 and PA66 due to less moisture uptake
  • EcoPaXX® PA410 allows for very sustainable solutions to its low carbon footprint (70% biobased)
  • Stanyl® PA46 and Akulon® PA66 allow for reliable solutions due to their high melting point of 295 and 260 °C resulting in no deformation at very high sensor tip temperatures

Stanyl® TW271F6J10

Polymer
(PA46+PTFE)-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, verbesserte tribologische Eigenschaften

Windshield Wiper Actuators

Branche
Automotive
  • Stanyl® PA46 allows for lightweight and cost effective solutions as compared to machined cast metal and also offers advantages in NVH
  • Stanyl® PA46 allows for reliable solutions due to its superiority in temperature and abrasion performance as compared to PA66 and POM
  • Stanyl® PA46 allows for cost effective solutions due to its faster cycle times in comparison with PA66 and PPA

Stanyl® TW271F8

Polymer
(PA46+PTFE)-GF40
Verarbeitung
Injection Molding
Automobil OEM
GM
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert, verbesserte tribologische Eigenschaften

Variator transmission parts

Branche
Transportation
Material
  • Stanyl® PA46 allows for reliable solutions, since it extends part lifetime up to 200% compared to conventional materials due to its proven wear resistance and high chemical resistance

Stanyl® TW275F6

Polymer
PA46-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, verbesserte tribologische Eigenschaften

WtB and BtB Connectors

Branche
Electronics
  • Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to their high-heat resistance, a unique balance of high stiffness and good flowability and high strength and creep resistance levels leading to good pin retention
  • Stanyl® PA46 and ForTii® PA4T allow for cost effective solutions to due good processability and high flowability enabling thin walled designs

Stanyl® TW300

Polymer
PA46
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, FORD, MERCEDES
Besondere Merkmale
Wärmestabilisiert

Stanyl® TW341-B

Polymer
PA46
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert, geschmiert

Stanyl® TW341-FC

Polymer
PA46
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert, geschmiert, zugelassen für Lebensmittelkontakt

Stanyl® TW341-J

Polymer
PA46
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert, geschmiert

Stanyl® TW341-N

Polymer
PA46
Verarbeitung
Injection Molding
Automobil OEM
MERCEDES
Besondere Merkmale
Wärmestabilisiert, geschmiert

Stanyl® TW350

Polymer
PA46 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert, flammwidrig

Stanyl® WTP81

Polymer
PA46
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert, geschmiert