278 Ergebnisse
Neu

Akulon® IG-HG5

Polymer
(PA46+PA6)-GF25
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt, wärmestabilisiert
Neu

Central Floor

Branche
Automotive
  • The UD tapes based ply-books were thermo-formed to the final shape. The composite part is 18% lighter than state-of-the-art, steel-based designs, while still fulfilling safety requirements.
  • The composite strength and dimensional stability are not affected by the E-coating process.
Neu

Akulon® IG-HG7

Polymer
(PA46+PA6)-GF35
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert
Neu

Door panel

Branche
Automotive
  • The UD tape products were thermo-formed and glued, which is 60% lighter than state-of-the-art , steel-based designs, while still fulfilling safety requirements.
Neu

Akulon® PA66-HC12 UD

Polymer
PA66-CF60
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz
Neu

Wheel

Branche
Automotive
  • The hybrid wheel-rim is 2 kg lighter and 30% more fatigue-resistant than a steel design, whilst inert to road salts and battery acids.
Neu

Akulon® S223-G6-FC BK00001

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, zugelassen für Lebensmittelkontakt

Agricultural Films

Branche
Industrial equipment
Material
  • Akulon® PA6 F136-C allows for reliable solutions due to its optimized mechanical strength and due to its low permeation to methyl bromide compared to conventional materials
  • Akulon® PA6 F136-C allows for cost effective solutions due to an improved bubble stability, an optimized processing efficiency
Neu

Akulon® S223-G6-FC NA99001

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, zugelassen für Lebensmittelkontakt

Air inlet manifolds

Branche
Automotive
  • Akulon® PA6 allows for light weight (40% lighter) and cost effective solutons as compared to metal
  • Akulon® PA6 allows for reliable solutions due to its higher heat ageing resistance and its better welding strength in comparison with PA66
  • Akulon® Ultraflow grades allow for addtional cost effectiveness due to 25% cycle time advantage as compared to standard grades

Akulon® K224-G6

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Automobil OEM
BMW, JAGUAR LAND ROVER, MERCEDES, RENAULT, TOYOTA
Besondere Merkmale
Mit 30% Glasfasern verstärkt

Airbag Containers

Branche
Automotive
  • Akulon® PA6 allows for 40-60% weight reduction versus metal
  • Akulon® PA6 allows for reliable (safer since no metal bolts needed) and cost effective solutions versus metal (due to the possibility of function integration) and versus PA66 (PA6 more economical choice)
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® F223-D

Polymer
PA6
Verarbeitung
Injection Molding
Automobil OEM
BMW, CALLOUT, MERCEDES, VW
Besondere Merkmale
Niedrige bis mittlere Viskosität

Automotive Connectors (2)

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, EcoPaXX® PA410, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high mechanical property levels and good electrical insulation properties
  • Akulon® PA6 and PA66 allow for cost effective solutions due to high mechanical properties (especially toughness and strength)

Akulon® Diablo HDT2500 BK00001

Polymer
PA66-GF35
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, PSA, RENAULT
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert

Bobbins

Branche
Electrical
  • Stanyl® PA46 allows for reliable solutions due to good creep resistance and good electrical properties (UL146 class F certified (unreinforced) and class H (reinforced grades)
  • Akulon® PA6 and Stanyl® PA46 allow for cost efficient solutions due to high toughness levels resulting in low reject levels in winding process and due to excellent flowability enabling thin wall designs
  • Arnite T (PBT) and Arnite A (PET) allow for reliable solutions due to good electrical properties especially at elevated temperatures and due to excellent dimensional stability

Akulon® Fuel Lock FLE40-HP

Polymer
PA6-I
Verarbeitung
Blow Molding
Besondere Merkmale
Low fuel permeation PA6 suitable for use in blow molding

CEE connectors

Branche
Electrical
Material
  • Akulon® PA6 allows for reliable solutions due to good electrical and mechanical properties (especially impact resistance) at low & high temperatures, excellent CTI values, UL94 V2 at 0.75 mm certification
  • Akulon® PA6 allows for colourfull designs due to good colourability with master batches

Akulon® F128

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Folienextrusion, mittlere Viskosität, zugelassen für Lebensmittelkontakt

Chainsaw housings

Branche
Consumer goods
  • Akulon® PA6 allows for reliable solutions, since it withstands drop test at –30°C
  • Akulon® PA6 allows for cost effective solutions, since it is easy to process for both injection- and blow moulding

Akulon® F130

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Folienextrusion, mittlere Viskosität, zugelassen für Lebensmittelkontakt

Cheese Packaging Biaxially Oriented Film (BOPA)

Branche
Consumer goods
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® F130-C1

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Folienextrusion, mittlere Viskosität, geschmiert, zugelassen für Lebensmittelkontakt

Cheese Packaging Blown Film

Branche
Consumer goods
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® F132-C1

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Folienextrusion, hohe Viskosität, geschmiert, zugelassen für Lebensmittelkontakt

Cheese Packaging Cast Film

Branche
Consumer goods
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® F132-E1

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Mittlere bis hohe Viskosität, Keimbildner, geschmiert, Folienextrusion, zugelassen für Lebensmittelkontakt

Chair Arms

Branche
Consumer goods
  • Akulon® PA6 allows for light weight, cost effective solutions in comparison with metals (no corrosion protection coating needed with PA6)
  • Akulon® (UltraFlow) PA6 allows for great appearance solutions, since it yields a better surface appearance than PA66 (even at 50-60%GF)
  • Akulon® UltraFlow PA6 allows for even more cost effective solutions, since it yields faster moulding than standard PA6 and enables thinner wall designs

Akulon® F132-E2

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Hohe Viskosität, Keimbildner, geschmiert, Folienextrusion, zugelassen für Lebensmittelkontakt

Chair Bases

Branche
Consumer goods
  • Akulon® PA6 allows for light weight, cost effective solutions in comparison with metals (no corrosion protection coating needed with PA6)
  • Akulon® (UltraFlow) PA6 allows for great appearance solutions, since it yields a better surface appearance than PA66 (even at 50-60%GF)
  • Akulon® UltraFlow PA6 allows for even more cost effective solutions, since it yields faster moulding than standard PA6 and enables thinner wall designs

Akulon® F136

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Sehr hohe Viskosität, Folienextrusion, zugelassen für Lebensmittelkontakt

Chair Frames

Branche
Consumer goods
  • Akulon® PA6 allows for light weight, cost effective solutions in comparison with metals (no corrosion protection coating needed with PA6)
  • Akulon® (UltraFlow) PA6 allows for great appearance solutions, since it yields a better surface appearance than PA66 (even at 50-60%GF)
  • Akulon® UltraFlow PA6 allows for even more cost effective solutions, since it yields faster moulding than standard PA6 and enables thinner wall designs

Akulon® F136-C1

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Sehr hohe Viskosität, Folienextrusion, geschmiert, zugelassen für Lebensmittelkontakt

Charge Air Cooler Caps

Branche
Automotive
  • Stanyl® PA46 allows for light weight solutions (40-50% lighter) and more cost effective solutions than metal
  • Stanyl® PA46 allows for reliable solutions due to its better creep/fatigue resistance than PPS and PPA and in case of Stanyl® Diablo due to its excellent long term temperature resistance up to 230°C
  • Akulon® and EcoPaXX® allow for light weight solutions (40-50% lighter) and more cost effective solutions than metal at the cold side.
  • Xytron™ PPS allows for super high temperatrue resistance for long term.

Akulon® F136-E1

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Sehr hohe Viskosität, geschmiert, Keimbildner, Folienextrusion, zugelassen für Lebensmittelkontakt

Clean Air Inlet Ducts

Branche
Automotive
  • Arnitel® TPC allows for light weight solutions (50% lighter than rubber)
  • Arnitel® TPC allows for reliable solutions due to its perfect combination of high (ageing) temperature resistance and good flexibility and chemical resistance
  • Akulon® PA6 allows for light weight solutions (50% lighter than metal) and for more rigid duct solutions.

Akulon® F136-E2

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Sehr hohe Viskosität, geschmiert, Keimbildner, Folienextrusion, zugelassen für Lebensmittelkontakt

Cold Charged Air Ducts

Branche
Automotive
  • Akulon® PA6 and Arnitel® TPC allow for light weight solutions as compared to metal or rubber
  • Akulon® PA6 and Arnitel® TPC allow for for cost effective solutions (Akulon lowers system cost up to 20% versus metal)
  • Akulon® PA6 and Arnitel® TPC allow for for reliable solutions due to their high temperature resistance

Akulon® Fuel Lock FLE-LP NA99001

Polymer
PA6-I
Verarbeitung
Injection Molding
Besondere Merkmale
Low fuel permeation PA6 suitable for use in injection molding/welding of small engine fuel tanks

Contactors

Branche
Electrical
  • Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance
  • Akulon® PA6 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses

Akulon® F-X9182

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Niedrige bis mittlere Viskosität, Folienextrusion, zugelassen für Lebensmittelkontakt

Convoluted Tubes

Branche
Industrial equipment
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness)
  • Stanyl® PA46 allows for reliable solutions due to its better temperature resistance in comparison with PA66

Akulon® F-X9190

Polymer
PA6
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität

Corkscrew

Branche
Consumer goods
  • Akulon® PA6 allows for light weight, cost effective solutions in comparison with metals (no corrosion protection coating needed with PA6)
  • Akulon® (UltraFlow) PA6 allows for great appearance solutions, since it yields a better surface appearance than PA66 and PPA (even at 50-60%GF)
  • Akulon® UltraFlow PA6 allows for even more cost effective solutions, since it yields faster moulding than standard PA6 and enables thinner wall designs

Akulon® HR-HG6

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Automobil OEM
PSA, RENAULT
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, Hydrolysis resistant

Cylinder head covers

Branche
Automotive
  • Faster injection molding process
  • Holding step eliminated
  • Shorter cooling time
  • Lower weight
  • Lower warpage

Akulon® Diablo HT-HG0

Polymer
(PA66+PA6)-GF50
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, RENAULT
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert

E-Boxes

Branche
Automotive
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for reliable solutions due to their high temperature resistance (much higher than PP) and due to their good electrical insulation properties
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for cost effective solutions due to their ease of processability

Akulon® Diablo HT-HG6

Polymer
(PA66+PA6)-GF30
Verarbeitung
Injection Molding
Automobil OEM
GM, PSA
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Engine Cover with Air Inlet Filters

Branche
Automotive
  • Akulon® PA6 allows for reliable solutions due to high temperature resistance (better than PP), great surface appearance (better than PA66) and low warpage levels
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® K222-D

Polymer
PA6
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige Viskosität, zugelassen für Lebensmittelkontakt

Engine Covers

Branche
Automotive
  • Akulon® PA6 allows for reliable solutions due to high temperature resistance (better than PP), great surface appearance (better than PA66) and low warpage levels
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® K222-KGV4

Polymer
PA6-GF20 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 20% Glasfasern verstärkt, wärmestabilisiert, flammwidrig (halogen- u. phosphorfrei)

Engine mounts

Branche
Automotive
  • Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal
  • Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts
  • Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF

Akulon® K222-KGV6

Polymer
PA6-GF30 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, flammwidrig (halogen- u. phosphorfrei)

EV Charging Connectors

Branche
Electrical
Material
  • Akulon® PA6 allows for reliable solutions due to good electrical and mechanical properties (especially impact resistance) at low & high temperatures, excellent CTI and arc resistance values, UL94 V2 at 0.75 mm certification
  • Akulon® PA6 allows for appealing designs due to good surface aesthetics and for colourfull designs due to good colourability with master batches

Akulon® K222-KMV5

Polymer
PA6-MD25 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Mineral, wärmestabilisiert, flammwidrig (halogenfrei)

Exterior Mirror Bases

Branche
Automotive
  • Akulon® PA6 allows for light weight solutions as compared to metal
  • Akulon® PA6 allows for reliable solutions due to high weldline performance and temperature resistance (better than PP) and to its great surface appearance (better than PA66) and UV resistance (in case of L-stabilized grades)
  • Akulon® PA6 allows for cost effective solutions as compared to PA66
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® K223-HM6

Polymer
PA6-MD30
Verarbeitung
Injection Molding
Automobil OEM
PSA, RENAULT
Besondere Merkmale
Mit 30% Mineral, wärmestabilisiert

Fan & shrouds

Branche
Automotive
  • Faster injection molding process
  • Holding step eliminated
  • Shorter cooling time
  • Lower weight
  • Lower warpage

Akulon® K223-KTP4

Polymer
PA6-I
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT, FIAT CHRYSLER, GM, VW
Besondere Merkmale
Schlagzäh-modifiziert, wärmestabilisiert

Fans & Shrouds

Branche
Automotive
  • Akulon® PA6 allows for reliable solutions due to high temperature resistance (better than PP), great surface appearance (better than PA66) and low warpage levels
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® K223-TP4

Polymer
PA6-I
Verarbeitung
Injection Molding
Automobil OEM
BMW, GM, MERCEDES, TOYOTA
Besondere Merkmale
Schlagzäh-modifiziert

Fish Packaging Biaxially Oriented Film (BOPA)

Branche
Consumer goods
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® K224-G3

Polymer
PA6-GF15
Verarbeitung
Injection Molding
Automobil OEM
FORD, MERCEDES, VW
Besondere Merkmale
Mit 15% Glasfasern verstärkt

Fish Packaging Blown Film

Branche
Consumer goods
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® K224-HG7

Polymer
PA6-GF35
Verarbeitung
Injection Molding
Automobil OEM
FORD, GM, MERCEDES, PSA, RENAULT, TIER, VOLVO, VW
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert

Fish Packaging Cast Film

Branche
Consumer goods
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® K224-LG6 /E

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, GM, RENAULT
Besondere Merkmale
Mit 30% Glasfasern verstärkt, Spritzguss, verbesserte UV Stabilität

Front End Modules

Branche
Automotive
  • Akulon® PA6 allows for reliable soulutions due to more temperature resistance than PP and better surface appearance than PA66
  • Akulon® PA6 allows for more cost effective solutions than PA66
  • Akulon® UltraFlow allows for even more cost effectiveness, since it enables 25% thinner walls and up to 25 % faster moulding cycle times

Akulon® K224-LGM35

Polymer
PA6-(GF+MD)40
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, FORD, GM
Besondere Merkmale
Mit 15% Glasfasern verstärkt, mit 25% Mineral, verbesserte UV Stabilität

Fuel System: Various Components

Branche
Automotive
  • EcoPaXX® PA410, Stanyl® PA46 and Akulon® PA6 allow for reliable solutions due to their high resistance and impermeability to conventional gasoline fuel (E10) as well as to the more sustainable E85 fuel and to their good mechanical properties at various temperatures

Akulon® K224-PG6

Polymer
PA6-I-GF30
Verarbeitung
Injection Molding
Automobil OEM
BMW, GM, TOYOTA, VW
Besondere Merkmale
Mit 30% Glasfasern verstärkt, schlagzäh-modifiziert

Food Packaging Films

Branche
Consumer goods
  • Akulon® PA6 and Akulon® XS PA6 allow for reliable solutions since it yields high puncture resistance and high barrier properties for oxygen resulting in longer shelf lives and thus less food waste
  • Akulon® XS grades allow for cost effective solutions due to its unique processing characteristics as a result from its low crystallization rate and since it also enables better thermoforming and transparency, improved processing in blown-film through improved bubble stability, increased BUR and less curling in non-symmetrical film

Akulon® K224-PG8

Polymer
PA6-I-GF40
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, GM, TOYOTA, VW
Besondere Merkmale
Mit 40% Glasfasern verstärkt, schlagzäh-modifiziert

Fuse holder

Branche
Electrical
  • ForTii® allows the Fuse holder to withstand high temperatures and the material has a high impact resistance
  • Productivity improvement
  • Laser printing
  • Snap fitting
  • DIN rail mounting

Akulon® K224-TG9

Polymer
PA6-GF45
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 45% Glasfasern verstärkt

Fuse Holders

Branche
Automotive
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for reliable solutions due to their high temperature resistance (much higher than PP) and due to their good electrical insulation properties
  • Akulon® PA6, Arnite® PBT and Stanyl® PA46 allow for cost effective solutions due to their ease of processability

Akulon® Ultraflow K-FHG0

Polymer
PA6-GF50
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, GM, MERCEDES, PSA, RENAULT, VOLVO, VW
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit

Garlic press

Branche
Consumer goods
  • Akulon® PA6 allows for light weight, cost effective solutions in comparison with metals (no corrosion protection coating needed with PA6)
  • Akulon® (UltraFlow) PA6 allows for great appearance solutions, since it yields a better surface appearance than PA66 and PPA (even at 50-60%GF)
  • Akulon® UltraFlow PA6 allows for even more cost effective solutions, since it yields faster moulding than standard PA6 and enables thinner wall designs

Akulon® Ultraflow K-FHG6

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, GM, MERCEDES, PORSCHE, VOLVO, VW
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit

Grill Handles

Branche
Consumer goods
  • Akulon® PA6 allows for light weight, cost effective solutions in comparison with metals (no corrosion protection coating needed with PA6)
  • Akulon® (UltraFlow) PA6 allows for great appearance solutions, since it yields a better surface appearance than PA66 and PPA (even at 50-60%GF)
  • Akulon® UltraFlow PA6 allows for even more cost effective solutions, since it yields faster moulding than standard PA6 and enables thinner wall designs

Akulon® Ultraflow K-FHG7 /A

Polymer
PA6-GF35
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, PSA, RENAULT, VW
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit

High pressure type IV composite fuel tanks

Branche
Automotive
  • Akulon® Fuellock PA6 allows for lightweight solutions compared to metals
  • Akulon® Fuellock PA6 allows for reliable solutions due to its low permeability performance againt CNG, its high impact resistance down to -60°C, its high elongation down to -60°C
  • Akulon® Fuellock PA6 allows for cost effective solutions due to its good processability

Akulon® Ultraflow K-FHGM24

Polymer
PA6-(GF+MD)30
Verarbeitung
Injection Molding
Automobil OEM
FORD, MERCEDES, PSA, RENAULT
Besondere Merkmale
Mit 10% Glasfasern verstärkt, mit 20% Mineral, wärmestabilisiert, sehr gute Fließfähigkeit

HVAC lamellae

Branche
Automotive
  • Akulon® PA6 allows for light weight solutions as compared to metal
  • Akulon® PA6 allows for reliable solutions due to high weldline performance and temperature resistance (better than PP) and to its great surface appearance (better than PA66)
  • Akulon® PA6 allows for cost effective solutions as compared to PA66
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® Ultraflow K-FKGS6 /B

Polymer
PA6-GF30 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, flammwidrig, sehr gute Fließfähigkeit

Ice Skate Parts

Branche
Consumer goods
  • Akulon® PA6 allows for light weight, cost effective solutions in comparison with metals (no corrosion protection coating needed with PA6)
  • Akulon® (UltraFlow) PA6 allows for great appearance solutions, since it yields a better surface appearance than PA66 and PPA (even at 50-60%GF)
  • Akulon® UltraFlow PA6 allows for even more cost effective solutions, since it yields faster moulding than standard PA6 and enables thinner wall designs

Akulon® S223-G6

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Automobil OEM
MERCEDES
Besondere Merkmale
Mit 30% Glasfasern verstärkt

Industrial Connectors

Branche
Electrical
Material
  • ForTii® PA4T allows for reliable solutions due to good electrical and mechanical properties (especially impact resistance) at low & high temperatures, excellent CTI values, UL94 V2 at 0.75 mm certification
  • ForTii® PA4T allows for colourfull designs due to good colourability with master batches

Akulon® S223-G7

Polymer
PA66-GF35
Verarbeitung
Injection Molding

Hot Charged Air Ducts

Branche
Automotive
  • Stanyl® PA46, Stanyl® Diablo PA46, Akulon® Diablo PA and Arnitel® HT TPC allow for light weight solutions as compared to metal or rubber or alternative plastics (Stanyl® is 10% lighter than PPS)
  • Stanyl® PA46, Stanyl® Diablo PA46, Akulon® Diablo PA and Arnitel® HT TPC allow for cost effective solutions (Stanyl lowers system cost up to 20% versus metal)
  • Stanyl® PA46, Stanyl® Diablo PA46, Akulon® Diablo PA and Arnitel® HT TPC allow for reliable solutions (Stanyl® Diablo is long term resistant up to 230 ˚C, Akulon® Diablo ca be used around 200 ˚C) and Arnitel® HT is ideal as single part solution for flexible hot charge ducts.

Akulon® S223-HG0

Polymer
PA66-GF50
Verarbeitung
Injection Molding
Automobil OEM
BMW, JAGUAR LAND ROVER, PSA, RENAULT, VW
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert

Industrial Control Gear

Branche
Electrical
  • Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance
  • Akulon® PA6 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses

Akulon® S223-HG6

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Automobil OEM
BMW, GM, MERCEDES, PSA, RENAULT, VW
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Inline Skate Frames

Branche
Consumer goods
  • Akulon® PA6 offers the possibility for less weight and lower system costs through part and function integration, easier assembly and longer tool lives, in comparison with metals
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and due to its better surface appearance than PA66

Akulon® S223-HG7

Polymer
PA66-GF35
Verarbeitung
Injection Molding
Automobil OEM
GM, MERCEDES, PSA, RENAULT
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert

Instrument panels

Branche
Automotive
  • Faster injection molding process
  • Holding step eliminated
  • Shorter cooling time
  • Lower weight
  • Lower warpage

Akulon® S223-HPG5

Polymer
PA66-I-GF25
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt, schlagzäh-modifiziert, wärmestabilisiert, Schmiermittelbeständig

Integrated Air Inlet Manifolds (up to 180°C)

Branche
Automotive
  • Akulon® Diablo and Akulon® allow for 40% lighter and 20% lower system costs in comparison with metal
  • Akulon® Diablo and Akulon® allow for reliable solutions due to their long term heat resistance up to 200°C resp 180°C and due to their great welding strength

Akulon® S240-C

Polymer
PA66
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Zugelassen für Lebensmittelkontakt, hohe Viskosität

Integrated Air Inlet Manifolds (up to 230°C)

Branche
Automotive
  • Stanyl® Diablo and Akulon® Diablo allows for 40% lighter and 20% lower system costs in comparison with metal
  • Stanyl® Diablo allows for reliable solutions due to its long term heat resistance up to 230°C (in absolute strength values better than PPS) and due to its great welding strength (even better than PA6)
  • Akulon® Diablo positioned to be positioned upto 220 ˚C

Akulon® SafeConnect SC21

Polymer
PA66 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Flammwidrig

Lawnmower engine covers

Branche
Consumer goods
  • Akulon® PA6 offers the possibility for less weight and lower system costs through part and function integration, easier assembly and longer tool lives, in comparison with metals
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and due to its better welding strength and surface appearance as compared to PA66

Akulon® SafeConnect SC22

Polymer
PA66-GF25 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt, flammwidrig

Lawnmower Steering Tower

Branche
Consumer goods
  • Akulon® PA6 offers the possibility for less weight and lower system costs through part and function integration, easier assembly and longer tool lives, in comparison with metals
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and due to its better welding strength and surface appearance as compared to PA66
  • Akulon L grades do offer a good UV resistance

Akulon® CO-KGV4 /A JN.00.86

Polymer
PA6-GF20 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 20% Glasfasern verstärkt, wärmestabilisiert, flammwidrig (halogen- u. phosphorfrei)

Lawnmower Trimmer Heads

Branche
Consumer goods
  • Akulon® PA6 offers the possibility for less weight and lower system costs through part and function integration, easier assembly and longer tool lives, in comparison with metals
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and chemical resistance against oils, gas and greases, and due to its better welding strength and surface appearance as compared to PA66

Akulon® CO-KGV5

Polymer
PA6-GF25 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt, flammwidrig (halogen- u. phosphorfrei), mit Laser beschreibbar

Lawnmower Trimmer Housings

Branche
Consumer goods
  • Akulon® PA6 offers the possibility for less weight and lower system costs through part and function integration, easier assembly and longer tool lives, in comparison with metals
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and chemical resistance against oils, gas and greases, and due to its better welding strength and surface appearance as compared to PA66

Akulon® F-X9215

Polymer
PA6
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität

Lift truck steering wheel

Branche
Industrial equipment
  • Akulon® UltraFlow PA6 allows for complex shape and thin walled solutions due to its high flowability
  • Akulon® UltraFlow PA6 allows for reliable solutions due to its good mechanical properties and an excellent surface appearance compared to conventional materials
  • Akulon® UltraFlow PA6 allows for cost effective solutions due to its fast cycling times and its high flowability implying lower moulded-in-stress, reduced warpage and less required moulding tonnage

Akulon® F127

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Niedrige bis mittlere Viskosität, Folienextrusion, zugelassen für Lebensmittelkontakt

MCCB Housings

Branche
Electrical
  • Akulon® PA6 and ForTii® PA4T enable increased design flexibility and integrated functionality, facilitating smart assembly solutions
  • Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good dielectric aging performance at 150°C and high CTI values at 600 Volts
  • Akulon® PA6 and ForTii® PA4T allow for potential system cost reductions up to 15% ( wall thicknesses reduced leading to a volume reduction of up to 25%) compared to conventional materials

Akulon® F130-C

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Folienextrusion, mittlere Viskosität, geschmiert, zugelassen für Lebensmittelkontakt

Meat Packaging Biaxially Oriented Film (BOPA)

Branche
Consumer goods
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® F130-C2

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Mittlere Viskosität, Folienextrusion, geschmiert, zugelassen für Lebensmittelkontakt

Meat Packaging Blown Film

Branche
Consumer goods
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® F130-C3

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Monofilament Grade, Extrusionstype, mittlere Viskosität, geschmiert, zugelassen für Lebensmittelkontakt

Meat Packaging Cast Film

Branche
Consumer goods
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® F130-E5

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Mittlere Viskosität, Keimbildner, geschmiert, Folienextrusion, Antiblock

Medical Packaging Biaxially Oriented Film (BOPA)

Branche
Healthcare
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® F132

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Folienextrusion, hohe Viskosität, zugelassen für Lebensmittelkontakt

Medical Packaging Blown Film

Branche
Healthcare
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® F136-C

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Folienextrusion, sehr hohe Viskosität, geschmiert, zugelassen für Lebensmittelkontakt

Medical Packaging Cast Film

Branche
Healthcare
  • Akulon® PA6 has an outstanding mechanical strength
  • Akulon® has good oxygen barrier properties

Akulon® F136-DH

Polymer
PA6
Verarbeitung
Extrusion, Tube Extrusion
Automobil OEM
GM
Besondere Merkmale
Hohe Viskosität, Keimbildner, wärmestabilisiert, Rohrextrusion

Off-road Vehicle Oil Pans and Reservoirs

Branche
Consumer goods
  • Stanyl® PA46 allows for reliable solutions due to its better mechanical properties at elevated temperatures and its much better fatigue resistance as compared to PA66 and PPA
  • Stanyl® PA46 allows for cost effective solutions due to its ease of processing, short injection molding cycle times and good flowability

Akulon® F150-CZ

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Sehr hohe Viskosität, zugelassen für Lebensmittelkontakt, geschmiert

Oil Sumps and Pans

Branche
Automotive
  • Akulon® PA6 allows for 40-60% weight reduction and better NVH performance versus metal
  • Akulon® PA6 allows for cost effective solutions versus metal (due to the possibility of function integration) and versus PA66 (PA6 more economical choice)
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® F160-Z

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Sehr hohe Viskosität, geschmiert, zugelassen für Lebensmittelkontakt

Packaging for Sterilized Surgical Devices

Branche
Healthcare
Material
  • Akulon® PA6 F130-C LOPA allows for very cost effective solutions since it yields very low oligomer content vs. standard Polyamides which significantly reduces lactam pollution in film production, leading to less cleaning stops
  • Akulon® PA6 allows for reliable solutions due to its good barrier performance, high temperature sterilization resistance, puncture resistance & mechanical performance, food contact and USP capable, resistance to lipids & carrier solutions and good transparency

Akulon® F230-C

Polymer
PA6
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Mittlere Viskosität, Extrusion, Spritzguss

Miniature Circuit Breakers

Branche
Electrical
  • Akulon® PA6 allows for reliable solutions due to up to 30% improved electrical endurance compared to conventional materials
  • Akulon® PA6 allows for more appealing solutions due to enhanced aesthetics
  • Akulon® PA6 allows for system cost reduction up to 15% compared to thermoset compounds due to potential reduction of wall thicknesses by up to 2/3rd and due to potential part integration possibilities

Akulon® F230-C (inj.m.)

Polymer
PA6
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Mittlere Viskosität, Extrusion, Spritzguss

Miniature Circuit Breakers (2)

Branche
Electrical
  • Akulon® PA6 allows for reliable solutions due to up to 30% improved electrical endurance compared to conventional materials
  • Akulon® PA6 allows for more appealing solutions due to enhanced aesthetics
  • Akulon® PA6 allows for system cost reduction up to 15% compared to thermoset compounds due to potential reduction of wall thicknesses by up to 2/3rd and due to potential part integration possibilities

Akulon® F232

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Mittlere bis hohe Viskosität, Extrusionstype

Molded case circuit breakers

Branche
Electrical
  • Akulon® PA6, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to up-to 30% improved electrical endurance compared to conventional materials
  • Akulon® PA6, Stanyl® PA46 and ForTii® PA4T allow for more appealing solutions due to enhanced aesthetics
  • Akulon® PA6, Stanyl® PA46 and ForTii® PA4T allow for system cost reduction up to 15% compared to thermoset compounds due to potential reduction of wall thicknesses by up to 2/3rd and due to potential part integration possibilities

Akulon® F232-D

Polymer
PA6
Verarbeitung
Injection Molding
Besondere Merkmale
Hohe Viskosität

Motor Starter/Overload Relays

Branche
Electrical
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses

Akulon® F234-C

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Folienextrusion, hohe Viskosität, geschmiert, zugelassen für Lebensmittelkontakt

Outdoor power product fuel tanks

Branche
Consumer goods
  • Akulon® Fuellock PA6 allows for reliable solutions due to good UV-stability and excellent barrier to evaporative emissions compared to fluorinated HDPE
  • Akulon® Fuellock PA6 allows for cost effective solutions due to increased design freedom (minimum wall thickness possible up to 1.2mm)

Akulon® F236-C

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Hohe Viskosität, geschmiert, zugelassen für Lebensmittelkontakt

Pedals and Pedal Boxes

Branche
Automotive
  • Akulon® PA6 allows for light weight solutions as compared to metal
  • Akulon® PA6 allows for reliable solutions due to high weldline performance and temperature resistance (better than PP) and to its great surface appearance (better than PA66)
  • Akulon® PA6 allows for cost effective solutions as compared to PA66
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® Fuel Lock FL-LP

Polymer
PA6
Verarbeitung
Blow Molding, Extrusion, Injection Molding
Besondere Merkmale
Low fuel permeation PA6 suitable for use in injection molding/welding of small engine fuel tanks, UV stabilisiert

Photovoltaic connector

Branche
Energy
  • UL V-0, 5VA classified
  • Suitable for outdoor use w.r.t. exposure to Ultraviolet Light
  • Suitable for outdoor use w.r.t. exposure to Water and Immersion in accordance with UL 746C.

Akulon® Fuel Lock FL40-HPX1 BK00002

Polymer
PA6-I
Verarbeitung
Blow Molding
Besondere Merkmale
Low fuel permeation PA6 suitable for use in blow molding

Powertool Housings

Branche
Consumer goods
  • Akulon® PA6 allows for light weight and cost effective solutions compared to metals, also as a result of possible part and function integration, easier assembly and longer tool lives
  • Akulon® PA6 allows for reliable solutions due to its better welding strength and surface appearance than PA66

Akulon® Fuel Lock FL40-HPX1 NA99001

Polymer
PA6-I
Verarbeitung
Blow Molding
Besondere Merkmale
Low fuel permeation PA6 suitable for use in blow molding

Pulley covers

Branche
Automotive
  • Akulon® PA6 allows for reliable solutions due to high temperature resistance (better than PP), great surface appearance (better than PA66) and low warpage levels
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® Fuel Lock FL40-HPX2 BK00002

Polymer
PA6-I
Verarbeitung
Blow Molding
Besondere Merkmale
Low fuel permeation PA6 suitable for use in blow molding

Positition Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Akulon® Fuel Lock FL40-HPX2 NA99001

Polymer
PA6-I
Verarbeitung
Blow Molding
Besondere Merkmale
Low fuel permeation PA6 suitable for use in blow molding

Pump Housings

Branche
Industrial equipment
  • Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness), its better surface appearance in comparison with PA66
  • Akulon® UltraFlow PA6 allows for even more cost effective solutions, since it enables faster moulding in comparison with standard PA6 and enables thinner wall designs

Akulon® Fuel Lock FLE-LP BK29011

Polymer
PA6-I
Verarbeitung
Injection Molding
Besondere Merkmale
Low fuel permeation PA6 suitable for use in injection molding/welding of small engine fuel tanks

Radiator End Caps

Branche
Automotive
Material
  • Akulon® PA66 HR allows for reliable solutions due to its excellent hydrolysis resistance and due to its good thermo-mechanical properties
  • Akulon® PA66 HR allows for light weight solutions (10% lighter compared to PPS)
  • Akulon® PA66 HR allows for very cost effective solutions

Akulon® GA-XLG0

Polymer
PA6/Semi-aromatic polymer-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, UV stabilisiert

Railway Insulation Plates

Branche
Transportation
Material
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and due to its better surface appearance than PA66
  • Akulon® PA6 allows for very cost effective solutions

Akulon® GA-XLG6

Polymer
PA6/Semi-aromatic polymer-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, UV stabilisiert

Rear Grips

Branche
Transportation
Material
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and due to its better surface appearance than PA66

Akulon® HR-HG7

Polymer
PA66-GF35
Verarbeitung
Injection Molding
Automobil OEM
PSA, RENAULT
Besondere Merkmale
Mit 35% Glasfasern verstärkt, wärmestabilisiert, Hydrolysis resistant

Refrigerator hinge

Branche
Industrial equipment
  • Akulon® PA6 in this hinge reduces the cost and procissing steps compared to metal
  • PA6 offers the required mechanical properties and thoughness to meet the required high performance and quality

Akulon® IG-HG10

Polymer
(PA46+PA6)-GF50
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 50% Glasfasern verstärkt, wärmestabilisiert

Residual Current Breaker with Overload

Branche
Electrical
  • Akulon® PA6 and Arnite® PBT allow for reliable solutions due to excellent electrical (excellent short-circuit properties, including residual dielectric strength) and thermo-mechanical endurance compared to conventional materials
  • Akulon® PA6 and Arnite® PBT offer system cost down opportunities versus thermosets or other engineering plastics

Akulon® IG-UH (P755D)

Polymer
(PA46+PA6)
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmestabilisiert, geschmiert

Residual Current device

Branche
Electrical
  • Akulon® PA6 enables reliable solutions due to excellent electrical (excellent short-circuit properties, including residual dielectric strength) and thermo-mechanical endurance compared to conventional materials
  • Akulon® PA6 offers system cost down opportunities versus thermosets or other engineering plastics

Akulon® K122/F

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Niedrige Viskosität, zugelassen für Lebensmittelkontakt

Resonators and ByPass Valves

Branche
Automotive
  • Stanyl® Diablo and Akulon® Diablo allows for 40% lighter and 20% lower system costs in comparison with metal
  • Stanyl® Diablo allows for reliable solutions due to its long term heat resistance up to 230°C (in absolute strength values better than PPS) and due to its great welding strength (even better than PA6)
  • Akulon® Diablo positioned to be positioned upto 220 ˚C

Akulon® K125/A

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Niedrige Viskosität, zugelassen für Lebensmittelkontakt

Rocker Valve Covers

Branche
Automotive
  • Akulon® PA6 allows for 40-60% weight reduction and better NVH performance versus metal
  • Akulon® PA6 allows for cost effective solutions versus metal (due to the possibility of function integration) and versus PA66 (PA6 more economical choice)
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® K222-KGMV14

Polymer
PA6-(GF+MD)25 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 5% Glasfasern verstärkt, mit 20% Mineral, wärmestabilisiert, flammwidrig (halogen- u. phosphorfrei)

Roof Racks

Branche
Automotive
  • Akulon® PA6 allows for light weight solutions as compared to metal
  • Akulon® PA6 allows for reliable solutions due to high weldline performance and temperature resistance (better than PP) and to its great surface appearance (better than PA66) and UV resistance (in case of L-stabilized grades)
  • Akulon® PA6 allows for cost effective solutions as compared to PA66
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® K222-KGV4 /A

Polymer
PA6-GF20 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 20% Glasfasern verstärkt, wärmestabilisiert, flammwidrig (halogen- u. phosphorfrei)

Skibinding Fixations

Branche
Consumer goods
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and due to its better surface appearance than PA66
  • Akulon® PA6 allows for very cost effective solutions

Akulon® K222-KGV5

Polymer
PA6-GF25 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Glasfasern verstärkt, flammwidrig (halogenfrei), wärmestabilisiert

Smokable Sausage Casings

Branche
Consumer goods
  • Arnitel® TPC and Akulon® PA6 allow for reliable solutions since they yield excellent smoke penetration leading to great taste and sausage structure and high quality
  • Arnitel® TPC and Akulon® PA6 allow for sustainable solutions, since they are free of substances of hazardous concerns and thus more environmentally friendly than cellulose casings

Akulon® K222-KMV5 /A

Polymer
PA6-MD25 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Mineral, flammwidrig (halogenfrei), farbbeständig

Snowboard Binding Base Plate

Branche
Consumer goods
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and due to its better surface appearance than PA66
  • Akulon® PA6 allows for very cost effective solutions

Akulon® K223-HGM24

Polymer
PA6-(GF+MD)30
Verarbeitung
Injection Molding
Automobil OEM
FORD, MERCEDES, VW
Besondere Merkmale
Mit 10% Glasfasern verstärkt, mit 20% Mineral, wärmestabilisiert

Snowmobile Front- and Rear Bumbers

Branche
Consumer goods
  • Akulon® PA6 impact modified offers a 6.5% weight savings, leading to 23% cost savings and a 30% assembly-time-reduction compared to previous polyethylene covered steel tube bumper, maintaining the desired stiffness and improved impact strength
  • Akulon® PA6 L-types offer reliable solutions due to its good UV stability

Akulon® K223-KMV6

Polymer
PA6-MD30 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Mineral, wärmestabilisiert, flammwidrig

Snowmobile Rear Seat Handle

Branche
Consumer goods
  • Akulon® PA6 impact modified offers a 6.5% weight savings, leading to 23% cost savings and a 30% assembly-time-reduction compared to previous polyethylene covered steel tube bumper, maintaining the desired stiffness and improved impact strength
  • Akulon® PA6 L-types offer reliable solutions due to its good UV stability

Akulon® K223-P2

Polymer
PA6-I
Verarbeitung
Injection Molding
Automobil OEM
MERCEDES
Besondere Merkmale
Schlagzäh-modifiziert

Solarium Hinges

Branche
Consumer goods
  • Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and due to its better surface appearance than PA66
  • Akulon® UltraFlow PA6 allows for very cost effective solutions since it enables thin wall designs (due to high flowability) and high productivity rates (up to 25% cycle time advantage in molding)

Akulon® K224-G0

Polymer
PA6-GF50
Verarbeitung
Injection Molding
Automobil OEM
BMW, VOLVO
Besondere Merkmale
Mit 50% Glasfasern verstärkt

Spatulas and Kitchenware

Branche
Consumer goods
  • Stanyl® PA46 and Akulon® PA66 allow reliable solutions, since Stanyl® PA46 offers much higher melting temperature and HDT than PA66 and Akulon® PA66 has significantly higher melting temperature resistance than PP and PA6
  • Stanyl® PA46 allows for cost effective solutions since it offers high flowability enabling very thin wall designs and faster injection moulding cycle times than PA66

Akulon® K224-G4U

Polymer
PA6-GF23
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 23% Glasfasern verstärkt

Speed Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Akulon® K224-G6-FC 99.99.99

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, zugelassen für Lebensmittelkontakt

Stock Shapes for Various Industries

Branche
Industrial equipment
  • Akulon® PA6 has an excellent wear and friction behaviour

Akulon® K224-G6-FC BK00001

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, zugelassen für Lebensmittelkontakt

Structural Reinforcements

Branche
Automotive
Material
  • Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal
  • Akulon® (UltraFlow) PA6 allows for reliable solutions due to its high temperature resistance and due to its good compatibility with the expansion rubber/foam applied on the moulded parts

Akulon® K224-G6-FC NA99001

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, zugelassen für Lebensmittelkontakt

Sunroof frame

Branche
Automotive
  • Faster injection molding process
  • Holding step eliminated
  • Shorter cooling time
  • Lower weight
  • Lower warpage

Akulon® K224-G6U

Polymer
PA6-GF33
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 33% Glasfasern verstärkt

Suspension System Spring Seats

Branche
Automotive
  • Akulon® PA6 allows for light weight solutions versus metal (up to 50% weight reduction)
  • Akulon® PA6 K224-PG8 allows for reliable solutions due to its combination of excellent toughness with high stiffness

Akulon® K224-G7

Polymer
PA6-GF35
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt

Suspension System Top Mounts

Branche
Automotive
  • Akulon® (UltraFlow) PA6 and Stanyl® PA46 yield up to 50% weight reduction and a NVH advantage versus metal
  • Akulon® (UltraFlow) PA6 and Stanyl® PA46 allow for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts
  • Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF
  • Stanyl® PA46 allows for a more cost effective solution than PPA and PPS

Akulon® K224-G8

Polymer
PA6-GF40
Verarbeitung
Injection Molding
Automobil OEM
BMW, HYUNDAI KIA
Besondere Merkmale
Mit 40% Glasfasern verstärkt

Switch Base

Branche
Electrical
  • Improved chemical resistance
  • Avoidance of stress cracking

Akulon® K224-HG5

Polymer
PA6-GF25
Verarbeitung
Injection Molding
Automobil OEM
BMW, FIAT CHRYSLER, MERCEDES, VW
Besondere Merkmale
Mit 25% Glasfasern verstärkt, wärmestabilisiert

Terminal Blocks

Branche
Electrical
  • Akulon® PA6, Arnite® PBT, Stanyl® PA46 and ForTii® PA4T allow for reliable solutions due to good mechanical properties at low & high temperatures and due to excellent CTI values

Akulon® K224-HG6

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Automobil OEM
BMW, FIAT CHRYSLER, FORD, GM, JAGUAR LAND ROVER, MERCEDES, PORSCHE, PSA, RENAULT, TESLA, TOYOTA, VOLVO, VW
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Temperature Sensor

Branche
Automotive
  • Stanyl® PA46, ForTii® PA4T, Akulon® PA66, Akulon® PA6, Arnite® PBT allow for reliable solutions due to high temperature resistance, high toughness levels and good electrical insulation properties
  • Stanyl® PA46 allows for cost effective solutions due to a better flowability and processability than PPS and PPA enabling therefore thin wall designs
  • ForTii® PA4T allows for reliable solutions exposed to very high peak temperatures due to its melting point of 325 C

Akulon® K224-HG6U

Polymer
PA6-GF33
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER
Besondere Merkmale
Mit 33% Glasfasern verstärkt, wärmestabilisiert

Thermoplastic Oil Pan

Branche
Automotive
  • 40% less weight and up to 50% lower system costs compared to metal
  • Higher productivity possible with Ultraflow technology
  • Higher durability, even higher than PA66
  • Proven concept

Akulon® K224-HG8

Polymer
PA6-GF40
Verarbeitung
Injection Molding
Automobil OEM
GM, TESLA, TIER
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert

Top Mounts

Branche
Automotive
  • Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal
  • Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts
  • Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF

Akulon® K224-HGM35

Polymer
PA6-(GF+MD)40
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER, FORD
Besondere Merkmale
Mit 15% Glasfasern verstärkt, mit 25% Mineral, wärmestabilisiert

Torque Rods

Branche
Automotive
  • Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal
  • Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts
  • Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF

Akulon® K224-HGR24

Polymer
PA6-(GF+GB)30
Verarbeitung
Injection Molding
Automobil OEM
FORD, GM
Besondere Merkmale
Mit 10% Glasfasern verstärkt, mit 20% Glaskugeln verstärkt, wärmestabilisiert

Transmission Oil Pans

Branche
Automotive
  • Akulon® PA6 allows for 40-60% weight reduction and better NVH performance versus metal
  • Akulon® PA6 allows for cost effective solutions versus metal (due to the possibility of function integration) and versus PA66 (PA6 more economical choice)
  • Akulon® Ultraflow grades allow even for more cost effectiveness due to 25% cycle time advantage and due to high flowability enabling thinner walled designs

Akulon® K224-HPG3

Polymer
PA6-I-GF15
Verarbeitung
Injection Molding
Automobil OEM
MERCEDES, PSA
Besondere Merkmale
Mit 15% Glasfasern verstärkt, wärmestabilisiert, schlagzäh-modifiziert

Wall plates

Branche
Electrical
Material
  • Akulon® PA6 allows for reliable solutions due to good electrical and mechanical properties (especially impact resistance) at low & high temperatures, excellent CTI values, UL94 V2 at 0.75 mm certification
  • Akulon® PA6 allows for colourfull designs due to good colourability with master batches

Akulon® K224-LG7/E

Polymer
PA6-GF35
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt, UV stabilisiert

Wheel Chair Rims

Branche
Healthcare
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness) and due to its better surface appearance than PA66
  • Akulon® PA6 allows for very cost effective solutions

Akulon® K224-LPG6U

Polymer
PA6-I-GF33
Verarbeitung
Injection Molding

Wheel Speed Sensors

Branche
Automotive
  • EcoPaXX® PA410 allows for reliable solutions due its thermal resistance up to 250°C and better chemical resistance than PA66, its better dimensional stability than PA6 and PA66 due to less moisture uptake
  • EcoPaXX® PA410 allows for very sustainable solutions to its low carbon footprint (70% biobased)
  • Stanyl® PA46 and Akulon® PA66 allow for reliable solutions due to their high melting point of 295 and 260 °C resulting in no deformation at very high sensor tip temperatures

Akulon® K224-PG2

Polymer
PA6-I-GF8
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 8% Glasfasern verstärkt, schlagzäh-modifiziert

Wheels

Branche
Industrial equipment
  • Akulon® PA6 allows for reliable solutions due to its good mechanical properties (stiffness and toughness)
  • Akulon® PA6 allows for cost effective solutions in comparison with PA66, also because of its better surface appearance

Akulon® K224-PG3

Polymer
PA6-I-GF15
Verarbeitung
Injection Molding
Automobil OEM
MERCEDES
Besondere Merkmale
Mit 15% Glasfasern verstärkt, schlagzäh-modifiziert

Akulon® K225-KS

Polymer
PA6 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Flammwidrig (halogenfrei), wärmestabilisiert

Akulon® K225-KV

Polymer
PA6 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Flammwidrig (halogenfrei), wärmestabilisiert

Akulon® K227-XHG6

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert

Akulon® K240-HP

Polymer
PA6-I
Verarbeitung
Blow Molding, Extrusion
Automobil OEM
MERCEDES, PSA
Besondere Merkmale
Wärmestabilisiert, schlagzäh-modifiziert, Extrusionsblasformen

Akulon® M-1016

Polymer
PA66-GF33
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 33% Glasfasern verstärkt, wärmestabilisiert

Akulon® N22D

Polymer
PA6
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige Viskosität

Akulon® N22D-H

Polymer
PA6
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige Viskosität

Akulon® N24-G3

Polymer
PA6-GF15
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 15% Glasfasern verstärkt

Akulon® N24-G6

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt

Akulon® N24-G7

Polymer
PA6-GF35
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 35% Glasfasern verstärkt

Akulon® N24-G8

Polymer
PA6-GF40
Besondere Merkmale
Mit 40% Glasfasern verstärkt

Akulon® N24-HM6

Polymer
PA6-MD30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Mineral, wärmestabilisiert

Akulon® PA6-HG12 UD

Polymer
PA6-GF60
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz

Akulon® PA66-HG12 UD

Polymer
PA66-GF60
Besondere Merkmale
-, Uni-Directional Tape, wärmestabilisiert, Schwarz

Akulon® RePurposed RE BK00003

Polymer
PA6
Verarbeitung
Injection Molding
Besondere Merkmale
Rezyklatanteil

Akulon® RePurposed RE15 BK00003

Polymer
PA6-GF15
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 15% Glasfasern verstärkt, Rezyklatanteil

Akulon® RePurposed RE30 BK00003

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, Rezyklatanteil

Akulon® S222

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige Viskosität

Akulon® S223-D

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität, Keimbildner

Akulon® S223-DH

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität, Keimbildner, wärmestabilisiert

Akulon® S223-E

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität

Akulon® S223-EH

Polymer
PA66
Verarbeitung
Injection Molding
Automobil OEM
VW
Besondere Merkmale
Niedrige bis mittlere Viskosität, wärmestabilisiert

Akulon® S223-F

Polymer
PA66
Verarbeitung
Injection Molding
Besondere Merkmale
Niedrige bis mittlere Viskosität

Akulon® S223-G4U

Polymer
PA66-GF23
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 23% Glasfasern verstärkt

Akulon® S223-HG3

Polymer
PA66-GF15
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 15% Glasfasern verstärkt, wärmestabilisiert

Akulon® S223-KG6

Polymer
PA66-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit Glasfasern verstärkt, wärmestabilisiert

Akulon® S227-C

Polymer
PA66
Verarbeitung
Extrusion, Injection Molding
Besondere Merkmale
Unverstärkt, mittlere Viskosität, geschmiert, zugelassen für Lebensmittelkontakt, Extrusionstype

Akulon® S240-CH Inj-Mold

Polymer
PA66
Verarbeitung
Injection Molding

Akulon® S245-C

Polymer
PA66
Verarbeitung
Blow Molding, Extrusion
Besondere Merkmale
Zugelassen für Lebensmittelkontakt, hohe Viskosität

Akulon® SG-KGS6

Polymer
PA66-GF30 FR
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, Frei von rotem Phosphor und Halogenen

Akulon® SG-KGS6/HV

Polymer
PA66-GF30 FR(40)
Besondere Merkmale
Mit 30% Glasfasern verstärkt, sehr gute Fließfähigkeit, Frei von rotem Phosphor und Halogenen

Akulon® TC185

Polymer
PA6 FR(17)
Verarbeitung
Injection Molding
Besondere Merkmale
Wärmeleitfähiger Werkstoff, flammwidrig, wärmestabilisiert

Akulon® Ultraflow K-FG0

Polymer
PA6-GF50
Verarbeitung
Injection Molding
Automobil OEM
RENAULT
Besondere Merkmale
Mit 50% Glasfasern verstärkt, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FG12

Polymer
PA6-GF60
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 60% Glasfasern verstärkt, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FG5

Polymer
PA6-GF25
Verarbeitung
Injection Molding
Automobil OEM
MERCEDES
Besondere Merkmale
Mit 25% Glasfasern verstärkt, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FG6

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Automobil OEM
MERCEDES
Besondere Merkmale
Mit 30% Glasfasern verstärkt, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FG9

Polymer
PA6-GF45
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 45% Glasfasern verstärkt, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FHG12

Polymer
PA6-GF60
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT
Besondere Merkmale
Mit 60% Glasfasern verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FHG6/B

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit, verbesserte Verarbeitung

Akulon® Ultraflow K-FHG8

Polymer
PA6-GF40
Verarbeitung
Injection Molding
Automobil OEM
GM
Besondere Merkmale
Mit 40% Glasfasern verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FHGM35

Polymer
PA6-(GF+MD)40
Verarbeitung
Injection Molding
Automobil OEM
FIAT CHRYSLER
Besondere Merkmale
Mit 15% Glasfasern verstärkt, mit 25% Mineral, wärmestabilisiert, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FHGR24

Polymer
PA6-(GF+GB)30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 10% Glasfasern verstärkt, mit 20% Glaskugeln verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FKG3

Polymer
PA6-GF15
Automobil OEM
GM
Besondere Merkmale
Mit 15% Glasfasern verstärkt, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FKG6

Polymer
PA6-GF30
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, wärmestabilisiert, sehr gute Fließfähigkeit

Akulon® Ultraflow K-FKG8

Polymer
PA6-GF40
Verarbeitung
Injection Molding
Automobil OEM
CALLOUT
Besondere Merkmale
Mit 40% Glasfasern verstärkt, sehr gute Fließfähigkeit, wärmestabilisiert

Akulon® Ultraflow K-FKMV5

Polymer
PA6-MD25 FR(30)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Mineral, flammwidrig (halogenfrei), sehr gute Fließfähigkeit

Akulon® Ultraflow K-FKMV5 /C

Polymer
PA6-MD25
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 25% Mineral, flammwidrig (halogenfrei), sehr gute Fließfähigkeit

Akulon® Ultraflow K-FPG8

Polymer
PA6-I-GF40
Verarbeitung
Injection Molding
Besondere Merkmale
Mit Glasfasern verstärkt, sehr gute Fließfähigkeit

Akulon® Ultraflow K220-HGM44

Polymer
PA6-(GF+MD)40
Verarbeitung
Injection Molding
Automobil OEM
PSA
Besondere Merkmale
Mit 20% Glasfasern verstärkt, mit 20% Mineral, wärmestabilisiert

Akulon® XG-FKGS6

Polymer
PA6-GF30 FR(40)
Verarbeitung
Injection Molding
Besondere Merkmale
Mit 30% Glasfasern verstärkt, flammwidrig (halogenfrei)

Akulon® XS236-C

Polymer
PA6
Verarbeitung
Extrusion
Besondere Merkmale
Hohe Viskosität, geschmiert, zugelassen für Lebensmittelkontakt

Akulon® XS32 (F-X08057)

Polymer
PA6 copolymer
Verarbeitung
Extrusion
Besondere Merkmale
Hohe Viskosität, Neat resin, Extrusion, zugelassen für Lebensmittelkontakt

Akulon® XS32-C1 (FC-X9207)

Polymer
PA6 copolymer
Verarbeitung
Extrusion
Besondere Merkmale
Hohe Viskosität, geschmiert, Folienextrusion, zugelassen für Lebensmittelkontakt

Akulon® XS32-E2 (FC-X9200)

Polymer
PA6 copolymer
Verarbeitung
Extrusion
Besondere Merkmale
Hohe Viskosität, Keimbildner, geschmiert, Folienextrusion, zugelassen für Lebensmittelkontakt

Akulon® XS36-C1 (FC-X9224)

Polymer
PA6 copolymer
Verarbeitung
Extrusion
Besondere Merkmale
Sehr hohe Viskosität, geschmiert, Folienextrusion, zugelassen für Lebensmittelkontakt

Akulon® XS36-E2 (FC-X9201)

Polymer
PA6 copolymer
Verarbeitung
Extrusion
Besondere Merkmale
Sehr hohe Viskosität, geschmiert, Keimbildner, Folienextrusion, zugelassen für Lebensmittelkontakt

K-FKG12

Polymer
PA6-GF60