Akulon® XG-FKGS6

Mit 30% Glasfasern verstärkt, flammwidrig (halogenfrei)

Allgemeine Information

Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to furniture and packaging.
We offer Akulon® grades for injection molding, blow molding and extrusion (including barrier film, stock shapes, convoluted tubes, and mono and multi filament).
In molded parts the material offers an excellent balance of easy design and processing with outstanding mechanical properties over a wide temperature range and in diverse conditions. Meanwhile for extrusion the strength, resilience and easy processing of Akulon® sets the market standards.
Besondere Merkmale
Regulatorische Angelegenheiten

Rheologische Kennwerte

Verarbeitungsschwindung parallel
0.2
%
Verarbeitungsschwindung senkrecht
0.6
%

Mechanische Kennwerte

Zug-Modul
11500
MPa
Bruchspannung
135
MPa
Bruchdehnung
2
%
Charpy-Schlagzähigkeit (+23°C)
50
kJ/m²
Charpy-Kerbschlagzähigkeit (+23°C)
8
kJ/m²

Thermische Kennwerte

Formbeständigkeitstemperatur (1.8 MPa)
205
°C
Brennbarkeit bei nominal 1.5mm
V-0
class
geprüfte Probekörperdicke
1.6
mm
Brennbarkeit bei Dicke h
V-0
class
geprüfte Probekörperdicke
0.8
mm
Glühdrahtentflammbarkeitszahl GWFI
960
°C
GWFI - geprüfte Probekörperdicke (1)
1.6
mm
Glühdrahtentflammbarkeitszahl GWFI
960
°C
GWFI - geprüfte Probekörperdicke (2)
0.8
mm
Glühdrahtentzündungstemperatur GWIT
775
°C
GWIT - geprüfte Probekörperdicke (1)
1.6
mm
Glühdrahtentzündungstemperatur GWIT
775
°C
GWIT - geprüfte Probekörperdicke (2)
1
mm
Rel. Temperaturindex -elektrisch
140
°C
RTI elektrisch - geprüfte Probekörperdicke (1)
0.75
mm
Rel. Temperaturindex -elektrisch
140
°C
RTI elektrisch - geprüfte Probekörperdicke (2)
3
mm
Rel. Temperaturindex -mech. mit Schlagbelastung
110
°C
RTI mechanisch Schlag - geprüfte Probekörperdicke (1)
0.75
mm
Rel. Temperaturindex -mech. mit Schlagbelastung
110
°C
RTI mechanisch Schlag - geprüfte Probekörperdicke (2)
3
mm
Rel. Temperaturindex -mech. ohne Schlagbelastung
140
°C
RTI mechanisch - geprüfte Probekörperdicke (1)
0.75
mm
Rel. Temperaturindex -mech. ohne Schlagbelastung
140
°C
RTI mechanisch - geprüfte Probekörperdicke (2)
3
mm

Elektrische Kennwerte

Vergleichszahl der Kriechwegbildung
V

Sonstige Kennwerte

Feuchtigkeitsaufnahme
1.7
%
Dichte
1470
kg/m³

Diagramme

Anwendungsbeispiele

Contactors

Branche
Electrical
  • <ul> <li>Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance</li> <li>Akulon® PA6 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses</li> </ul>

Industrial Control Gear

Branche
Electrical
  • <ul> <li>Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good electrical and thermal endurance</li> <li>Akulon® PA6 and ForTii® PA4T allow for more design freedom and/or potential system cost reductions due to part integration and thinner wall design and lower profiles possibilities, reduced cycle time with lower production losses</li> </ul>

MCCB Housings

Branche
Electrical
  • <ul> <li>Akulon® PA6 and ForTii® PA4T enable increased design flexibility and integrated functionality, facilitating smart assembly solutions</li> <li>Akulon® PA6 and ForTii® PA4T allow for reliable solutions due to good dielectric aging performance at 150°C and high CTI values at 600 Volts</li> <li>Akulon® PA6 and ForTii® PA4T allow for potential system cost reductions up to 15% ( wall thicknesses reduced leading to a volume reduction of up to 25%) compared to conventional materials</li> </ul>

Residual Current Breaker with Overload

Branche
Electrical
  • <ul> <li>Akulon® PA6 and Arnite® PBT allow for reliable solutions due to excellent electrical (excellent short-circuit properties, including residual dielectric strength) and thermo-mechanical endurance compared to conventional materials</li> <li>Akulon® PA6 and Arnite® PBT offer system cost down opportunities versus thermosets or other engineering plastics</li> </ul>